Advertisement

Quick Links

Extractor hood
DWJ91LT60
User manual and installation instructions
[en]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DWJ91LT60 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bosch DWJ91LT60

  • Page 1 Extractor hood DWJ91LT60 User manual and installation instructions [en]...
  • Page 2: Table Of Contents

    en Safety Further information and explanations are available online: Table of contents ¡ Keep the instruction manual and the product information safe for future refer- ence or for the next owner. INFORMATION FOR USE ¡ Do not connect the appliance if it has been Safety ..............  2 damaged in transit.
  • Page 3: Safety

    Safety en Hot oil and fat ignites very quickly. WARNING ‒ Risk of burns! ▶ Always supervise hot oil and fat. The accessible parts of the appliance become ▶ Never extinguish burning oil or fat with wa- hot during operation. ter. Switch off the hotplate. Extinguish ▶...
  • Page 4: Avoiding Material Damage

    en Avoiding material damage Improper repairs are dangerous. Penetrating moisture may cause an electric ▶ Repairs to the appliance should only be shock. carried out by trained specialist staff. ▶ Do not use wet sponge cloths. ▶ Only use genuine spare parts when repair- WARNING ‒ Risk of explosion! ing the appliance.
  • Page 5: Operating Modes

    Operating modes en Operating modes 4  Operating modes 4.1 Air recirculation To bind odours in air recirculation mode, you must install an odour filter. The air which is drawn in is cleaned by the grease fil- The different options for operating the ters and an odour filter, and conveyed back into the appliance in air circulation mode can room.
  • Page 6: Before Using For The First Time

    en Before using for the first time Settings area: 3 fan settings/2 intensive Remote display modes Home Connect Switching automatic mode on or off 5.3 Control panel, variant 2 You can use the control panel to configure all functions of your appliance and to obtain information about the operat- ing status.
  • Page 7: Additional Functions In The Home Connect

    Additional functions in the Home Connect app en If odour filters can be regenerated, follow the instruc- a Automatic mode runs for a maximum of four hours. tions in the accompanying instructions. 7.9 Sensor sensitivity 7.13 Resetting the saturation indicator In automatic mode, a sensor in the appliance detects After cleaning the grease filter or after changing the the intensity of the cooking odours and roasting odour filter, the saturation indicator can be reset.
  • Page 8 en Home Connect 8.8 Favourites button 8.9 Voice Control You can specify 2 favourites functions via the You can control your extractor hood using voice control Home Connect app and then select these on your ap- with Amazon Alexa, for example. pliance. 8.10 Setting the colour temperature In the Home Connect app, you can set the colour tem- perature for the light from cold to warm.
  • Page 9: Hob-Based Hood Control

    Hob-based hood control en The first time your appliance is registered on a home 9.4 Remote diagnostics network connected to the Internet, your appliance will Customer Service can use Remote Diagnostics to ac- transmit the following types of data to the cess your appliance if you contact them, have your ap- Home Connect server (initial registration): pliance connected to the Home Connect server and if ¡...
  • Page 10 en Cleaning and servicing ATTENTION! WARNING ‒ Risk of electric shock! Falling grease filters may damage the hob below. An ingress of moisture can cause an electric shock. Grip below the grease filter with one hand. ▶ Before cleaning, pull out the mains plug or switch ▶...
  • Page 11: Troubleshooting

    Troubleshooting en Requirement: The grease filters have been removed. Position the large odour filters at the bottom swing them up ⁠ . → "Removing the grease filter", Page 10 Observe the information regarding the cleaning agents. → "Cleaning products", Page 9 Place the grease filters loosely into the dishwasher. Do not clean heavily soiled grease filters with utensils.
  • Page 12 en Disposal 12.1 Malfunctions Fault Cause and troubleshooting The appliance is not The mains plug of the power cord is not plugged in. working. Connect the appliance to the power supply. ▶ The circuit breaker in the fuse box has tripped. Check the circuit breaker in the fuse box. ▶...
  • Page 13: Accessories

    BSH Hausgeräte GmbH hereby declares that the appli- A detailed Declaration of Conformity can be found on- ance with Home Connect functionality conforms to the line at www.bosch-home.co.uk among the additional essential requirements and other relevant provisions of documents on the product page for your appliance.
  • Page 14: Source Software

    en Information regarding Free and Open Source Software UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only. Information regarding Free and Open Source Software 17  Information regarding Free and Open Source Software This product includes software components that are li- The source code will be made available to you on re- censed by the copyright holders as free or open quest.
  • Page 15: Installation Instructions

    Installation instructions en 19.2 Included with the appliance After unpacking all parts, check for any damage in transit and completeness of the delivery. 19.4 Safety clearances Comply with the safety clearances for the appliance. Tip: The retaining bracket for the flue duct section and the small silver and black crews are included in the scope of delivery but are not required for air recircula- tion appliances.
  • Page 16 en Installation instructions Changes to the electrical or mechanical as- WARNING ‒ Risk of fire! sembly are dangerous and may lead to mal- The grease deposits in the grease filter may functions. catch fire. ▶ Do not make any changes to the electrical ▶...
  • Page 17 Installation instructions en the permanent electrical installation accord- ¡ To install additional special accessory parts, ob- serve the enclosed installation instructions. ing to the conditions of Overvoltage Cat- ¡ The appliance must be installed with no more than egory III and according to the installation one side directly next to a tall unit, an upper cabinet regulations.
  • Page 18 en Installation instructions Drill the 8 mm diameter holes to a depth of 80 mm Installing the appliance for the fastenings. Place the mains plug on top of the appliance. Remove the template. Installing the appliance bracket Screw on the appliance bracket for the extractor hood hand-tight.
  • Page 19 Installation instructions en Note: Do not knock the gas pressure dampers Clip the gas pressure dampers onto the left- and against the painted inner frame. right-hand side of the glass panel. Clip the gas pressure dampers in on the left- and right-hand side of the appliance. Insert the plug.
  • Page 20 en Installation instructions Insert the grease filters. Connect the appliance to the power supply. Fitting the air recirculation deflector Push the air recirculation deflector onto the air-pipe connector until the air recirculation deflector audibly engages. To change the air circulation, turn the air recircula- tion deflector clockwise or anti-clockwise.
  • Page 24 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

Table of Contents