Panasonic NV-SD430 Series Operating Instructions Manual page 6

VCR OPERATION
Set VCRITV switch to VCR for using the
numeric buttons and the G-CODE button.
1. Infra-red Transmitter
2 Numeric Buttons
Selects programme positions (1-99) of the VCR.
eEnsure that VCR/TV switch is set to VCR.
9: ©
19: ®© ~@) ~@®
Programmes G-Code numbers.
eEnsure that VCR/TV switch is set to VCR.
3 OSD
For the On Screen Display Function.
4 RESET
Resets the tape counter (elapsed time) to "0:00.00".
5 [if (PAUSE/SLOW)
During playback:
®By pressing: Still picture. "0" is lit.
®By pressing for 2 seconds or more:
Slow playback. " 1" is lit.
During recording: Interrupts recording.
MENU:
ENTER:
Confirms the selection, or stores.
AV <P:
CH, DATE, ON, OFF:
Programmes a timer recording.
PROGJCHECK:
Sets and checks timer programmes.
CANCEL:
Cancels the settings made for timer recording.
SPEED:
Selects the desired tape speed for recording.
SP gives the best picture quality.
LP (EP) gives the longest recording time.
©The indicator (SP, LP or EP) corresponding to the
selected tape speed now appears on the VCR display
or on screen display.
LP: This appears when PAL/MESECAM signals are
input or output.
EP: This appears when NTSC signals are input or
output.
TIMER REC @:
Turns the timer recording function on and off.
2] is lit or not lit.
Once you operate the timer recording function, normal
VCR operation is not possible unless you press this
button again and release the VCR from the timer
recording standby mode.
8 AUDIO OUT
This button is not used to operate this VCR.
9 No function.
This button is not used to operate this VCR.
10 VCRITV switch
VCR:
Selects the VCR operation mode.
TV:
Selects the TV operation mode.