Set Program; Timer Programming - Panasonic Omnivision PV-C1322 Operating Instructions Manual

You can set up to 8 programs to be recorded while
you are away.
Press PROG to display SET PROGRAM
screen.
s_ P_oG,_ 1) Press &V to select
TIMER
_:'_':'_ _""' PROGRAMMING.
2) Press • to display
_:AT
,,- screen,
r=NO :moa
• If a program is already in
memory, press
AT,
and
• to select an unused
program number.
31 :1
SELI_-*CT:& •
EEr :l-
lEND : pROG/ACT I ON 1
Press AV to select
and • or • to set the
recording
DATE.
• 1-31 = One time
• DAILY = MON~FRI
• WEEKLY SUN-SAT
= Same time once a week
Exa___.__.__le(_8-9 ........ 31m 1 _ 2 ...... 6.-_,_ I
/
Today's-- 7 SELECTk/VSelecti°nOrder DAILY
Date L.WEEKLY .... WEEKLY WEEKLYJ
-- (SAT) " MON SUN
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside
• Speed (SP, LP, SLP)
source)
4 PressPROG (o,
• . ACTION) to end the
CANCI_LIADDIDLT To Enter More Programs,
SELECT l-B:& •
:=, press A, to select
_ :_P,oQl^cr_o, and • to set a blank
program number, and
then repeat step 3.
5
Press PROG twice (or ACTION)
to exit this mode.
• If you're using a cable box, make sure that it is
tuned to the desired channel and the power is
left on for timer recording.
•
PROG TIMER indicator
lights on
the unit.
_ Ready Check List
[] All connections are made.
[] Your unit is plugged in,
[] The clock is set to correct time.
[] The tape is long enough,
[] The record tab is in place.
[
PROGRAM TIMER indicator
__Timer Recording Using
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See page 11.)
I
VOL OH STOPFJECT REW/_
eee e F:IIE]
• -- ACTIO N --.
'_ Press STOP/EJECT and nEW
together without a tape inserted
to display MAIN MENU.
Press AV + - to select '_/CR"
and STOP/EJECT and nEW
together to display SET UP
VCR screen.
Press &V to select "TIMER
PROGRAM" and + to display
the TIMER PROGRAM screen.
Repeat main steps 3 ~ 5.
22