Warning And Instruction Displays - Panasonic Omnivision PV-C1322 Operating Instructions Manual

Press DISPLAY
to display or remove the overlay.
Channel Caption
(See page 28.)
Function Status
"_urrent Time Counter
I /
12;0OPM ABC
aec Time -_---_ o_ c, -o:,2:3,=/
Remaining I sP
(OTR mode only, I
see page 12) |
[
Tape Speed
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to "OFF" (see
page 27), the screen will turn solid blue.
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See page 28.)
Warning and Instruction Displays
These displays will alert you to a missed
operation or provide further instructions.
PLEASE SET CLOCK BEFORE
PROGRAMMING
CHECK CASSETTE RECORD TAB
TO CANCELTIMERREC HOLDDOWN
STOPKEYFOR APPROX 3 SEC
NO CASSETTE
PLEASE INSERT A CASSETTE
PLEASEPREPAREFOR TIMER REC
• If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
• If you press REC, and a cassette is inserted with 3, 12
no record tab...
• If you press STOP during a Timer Recording... 23
• If you press PLAY, FF, REW, or REC without a
cassette inserted,..
12
• If the unit is not in Stop mode or a cassette with 22, 23
record tab is not inserted two minutes before a
Timer Recording is about to begin...
VIDEOHEADSMAY NEED CLEANING • If head cleaning becomes necessary while playing 4
PLEASE INSERTHEADCLEANING back a tape...
• If you press a function button other than STOP/EJECT 27
or POWER while the unit is in VCR Lock mode...
32