Advertisement
Model:
TG1H-2HG
STANDARD FEATURES
DESIGN
• True's glass door reach-in heated cabinets are
designed with enduring quality that protects
your long term investment.
HEATER SYSTEM
• Cabinet designed to provide holding
temperatures of 80°F to 180°F (26.6°C to 82.2°C).
Heating system controlled by exterior on/off
switch and temperature control dial.
• Two (2) stainless steel (for corrosion resistance),
fi nned tube heating elements (1000 watts each)
for uniform generation of electric heat. Cabinet
comes with a total of 2000 watts.
• Equipped with low-velocity fans to assure
even temperature distribution throughout the
cabinet. Fans are controlled by exterior on/off
switch.
• Manually controlled vent located on top of the
cabinet for positive humidity control.
• 12" x 20" (305 mm x 508 mm) pan for water
included, if additional humidity required.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel rainshield.
Anodized quality aluminum sides, back and
bottom.
• Interior - NSF approved anodized aluminum side
walls and back liner. 300 series stainless fl oor
with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 6" (153 mm) stainless steel
legs.
DOORS
• Doors are energy effi cient, triple pane, thermal
insulated glass. Doors open within cabinet
dimension.
• Door locks standard.
PLAN VIEW
WARRANTY
One year warranty on all parts
and labor (U.S.A. only)
2001 East Terra Lane • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
TG Specifi cation Series:
Reach-In Glass Half Door Heated Cabinet
• Each door fi tted with 15" (381 mm) long
extruded aluminum handle.
• Positive seal self-closing doors with 120° stay
open feature. Lifetime guaranteed door hinges.
• Magnetic door gasket of one piece construction,
removable without tools for ease of cleaning.
SHELVING
• Three (3) chrome shelves 25" x 27
(635 mm x 705 mm) with shelf clips and wall
mounted pilasters (factory installed). 1
(27 mm) standoff ensures optimum airfl ow.
• Aluminum shelf support pilasters. Shelves are
adjustable on
• Three (3) different interior kits available (see Kit
Options). Pilasters and tray slides require fi eld
installation.
LIGHTING
• Incandescent interior lighting – lights activated
by exterior on/off switch, safety shielded.
MODEL FEATURES
• Exterior, color coded, dial thermometer;
accurate direct reading of internal cabinet
temperature.
• Designed to hold warm baked or cooked food.
Cabinet is not designed to heat ambient or cold
product.
• NSF-4 compliant for open food product.
1"
(26 mm)
77"
(1956 mm)
3
78
/
"
16
(1986 mm)
85
(2166 mm)
1
6
/
ELEVATION
16
1
3
/
"
16
(154 mm)
(31 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
3
/
"
4
1
/
16
1
/
" (13 mm) increments.
2
5
36
/
"
32
(919 mm)
5
34
/
"
8
(880 mm)
1
/
"
4
1
17
/
"
32
(39 mm)
"
PLAN VIEW
Model
KCL
TG1H-2HG
ELECTRICAL
• True requires that a sole use circuit be dedicated
for the unit.
• Unit completely pre-wired at factory and ready
for fi nal connection to a 115/208-240/60 Hz.
single phase, 20 amp dedicated outlet. Cord
and plug set included.
115/208-240/1
NEMA-14-20R
"
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ Seismic/fl anged legs.
❒ 4" (102 mm) diameter stem castors.
❒ Stainless steel rail skirt for use with legs (fi eld
installed).
❒ Additional shelves.
❒ Stainless steel (electro polished) shelves.
❒ Metal door handle (factory installed).
❒ Electronic temperature control (factory
installed).
❒ Curb mountable units.
KIT OPTIONS
Upcharge applies. Lead times may apply.
❒ Kit #1: Nine (9) sets of #1 type tray slides and
pilasters (fi eld installed), bottom support of one
(1) 18"L x 26"D (458 mm x 661 mm) pan or two
(2) 14"L x 18"D (356 mm x 458 mm) pans.
❒ Kit #2: One (1) set half-section #2 steel rod tray
slides and pilasters (fi eld installed), rim support
of one (1) 18"L x 26"D (458 mm x 661 mm) pan.
❒ Kit #3: Six (6) sets of universal type tray slides
and pilasters (fi eld installed), bottom support
of one (1) 18"L x 26"D (458 mm x 661 mm) pan,
two (2) 14"L x 18"D (356 mm x 458 mm) pans or
two (2) 12"L x 20"D (305 mm x
508 mm) pans.
❒ Additional kit option components available
individually.
29"
(737 mm)
21
35
/
"
32
(906 mm)
5
61
/
"
16
(1558 mm)
11
26
/
"
16
(678 mm)
Elevation
Right
Plan
3D
Advertisement
