Advertisement
Model:
TR2H-2G
STANDARD FEATURES
DESIGN
• True's glass door reach-in heated cabinets
are designed with enduring quality that
protects your long term investment.
HEATER SYSTEM
• Cabinet designed to provide holding
temperatures of 80°F to 180°F (26.6°C to
82.2°C). Heating system controlled by
exterior on/off switch and temperature
control dial.
• Two (2) stainless steel (for corrosion
resistance), fi nned tube heating elements
(1000 watts each) per section for uniform
generation of electric heat. Cabinet comes
with a total of 4000 watts.
• Equipped with low-velocity fans to assure
even temperature distribution throughout
the cabinet. Fans are controlled by exterior
on/off switch.
• Manually controlled vent located on top of
the cabinet for positive humidity control.
• 12" x 20" (305 mm x 508 mm) pan for water
included, if additional humidity required.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front,
sides, back and bottom.
• Interior - 300 series stainless steel liner and
fl oor.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 6" (153 mm) stainless
steel legs.
PLAN VIEW
FEED WIRE LOCATION
ELEVATION
WARRANTY
One year warranty on all parts
and labor (U.S.A. only)
2001 East Terra Lane • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
TR Specifi cation Series:
Reach-In Glass Door Heated Cabinet
DOORS
• Doors are energy effi cient, triple pane,
thermal insulated glass. Doors open within
cabinet dimension.
• Door locks standard.
• Each front glass door fi tted with 15"
(381 mm) long extruded aluminum handle.
• Positive seal self-closing doors with 120°
stay open feature. Lifetime guaranteed
door hinges.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• One (1) factory installed, interior kit option
per full section. Four (4) different interior
kits available (see Kit Options). Pilasters and
tray slides are factory installed at no charge.
LIGHTING
• Incandescent interior lighting - lights
activated by exterior on/off switch, safety
shielded.
MODEL FEATURES
• Exterior, color coded, dial thermometer;
accurate direct reading of internal cabinet
temperature.
• Designed to hold warm baked or cooked
food. Cabinet is not designed to heat
ambient or cold product.
• NSF-4 compliant for open food product.
ELECTRICAL
• True requires that a sole use circuit be
dedicated for the unit.
• Unit comes with 4 feed wires (including
ground) to be hardwired at installation site
to a 115/208-240/60 Hz. single phase, 20
amp dedicated outlet.
1"
(26 mm)
77"
(1956 mm)
3
78
/
"
16
(1986 mm)
85
(2166 mm)
3
6
1
/
1
/
"
16
16
(31 mm)
(154 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
FEED
WIRE
LOCATION
34
5
/
"
8
(880 mm)
1
/
"
4
17
1
/
"
32
(39 mm)
9
23
/
"
16
(599 mm)
"
Model
KCL
TR2H-2G
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ Seismic/fl anged legs.
❒ Stainless steel rail skirt (fi eld installed).
❒ Metal door handles (factory installed).
❒ Electronic temperature control (factory
installed).
❒ Curb mountable units.
KIT OPTIONS
❒ Kit #1: Nine (9) sets of #1 type tray slides
and pilasters (factory installed), bottom
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan or two (2) 14"L x 18"D
(356 mm x 458 mm) pans.
❒ Kit #2: One (1) set half-section #2 steel rod
tray slides and pilasters (factory installed),
rim support of one (1) 18"L x 26"D (458 mm
x 661 mm) pan.
❒ Kit #3: Six (6) sets of universal type tray
slides and pilasters (factory installed),
bottom support of one (1) 18"L x 26"D
(458 mm x 661 mm) pan, two (2) 14"L x
18"D (356 mm x 458 mm) pans or two (2)
12"L x 20"D (305 mm x 508 mm) pans.
❒ Kit #4: Three (3) chrome shelves 23
3
27
/
"D (597 mm x 705 mm). Four (4) shelf
4
clips included per shelf (factory installed).
Shelves adjustable on
(153 mm) increments.
❒ Additional kit option components available
individually.
❒ Stainless steel (electro polished) shelves to
be used with Kit Option #4.
51
3
/
"
8
(1305 mm)
21
35
(906 mm)
PLAN VIEW
Elevation
Right
1
/
"L x
2
1
/
" (13mm)
2
/
"
32
3
58
/
"
16
(1478 mm)
Plan
3D
Advertisement
