For additional information regarding dimensions/specifications, please contact factory.
TG2H-2S
TG1H-1S
•
Powerfully provides holding tempera-
tures of 80°F to 180°F throughout the
cabinet for uniform, forced-air, heating.
•
Low velocity fan(s) provided to assure
even temperature throughout cabinet. A
vent is located at the top of the cabinet
for positive humidity control.
•
Heater - stainless steel for corrosion
resistance.
•
Shelving - (3) heavy duty, chrome shelves
per section with wall mounted pilasters
(3) different interior kits available. (field
installation required).
•
300 series stainless steel doors and
front (the finest stainless available).
Toll Free Number • 1-800-325-6152
Model
SOLID DOORS
TG1H-1S ‡
TG2H-2S ‡
* Height does not include 6" for leg height or 5" for optional castors (castors available on
single section models only).
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TG2H-2S requires hard wiring.
Model
SOLID DOORS
TG1HPT-1S-1S ‡
TG2HPT-2S-2S ‡
* Height does not include 6" for leg height or 5" for optional castors (castors available on single
section models only).
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TG2HPT-2S-2S requires hard wiring.
True Heated
Cabinets are
designed to hold
warm baked or
cooked food.
Cabinets are not
designed to heat
ambient or cold
product.
•
Anodized quality aluminum sides, bottom
and back.
•
Anodized aluminum interior.
Foamed-in-place polyurethane high den-
•
sity cell insulation (CFC free).
•
Exterior mounted, color coded, tempera-
ture monitor.
Lifetime guaranteed recessed door
•
handles standard.
•
Door locks standard.
•
Doors equipped with lifetime guaranteed
self-closing hinges with 90 degree stay
open feature standard.
•
Humidity control - 12" x 20" pan stan-
dard.
Parts Department • 1-800-424-TRUE
Reach-In Heated Cabinets
Swing
Cu.
Crated
Doors
Ft.
Watts
Weight
1
31
2000
350
2
56
4000
565
Pass-Thru Heated Cabinets
Swing
Cu.
Crated
Doors
Ft.
Watts
Weight
2
31
2000
400
4
56
4000
600
TG2HPT-2S-2S
FEATURES/BENEFITS
Manual humidity control is a standard
•
feature (turn counterclockwise to ventilate).
•
Incandescent interior lighting.
6" legs standard equipment. 4" diameter
•
swivel castors available for single section
models only.
•
Pass-thru heated cabinet designed to be
rear-loaded from prep area and front
accessed.
•
Self-contained system.
Curb mountable units for TR, TA & TG series only. (5% list upcharge)
True Website: www.truemfg.com
TG Series
Cabinet Dimensions
L
D
H*
29 x 34
3
x 78
1
/
/
4
4
3
51
/
x 34
3
/
x 78
1
/
8
4
4
All dimensions rounded up to the nearest 1/8".
Cabinet Dimensions
L
D
H*
29 x 37
x 78
1
/
1
/
4
4
51
3
/
x 37
1
x 78
1
/
/
8
4
4
All dimensions rounded up to the nearest 1/8".