Pioneer A-300R Operating Instructions Manual

Operating
Instructions
@) PIONEER scrcomumunen A-ROOR
2
2 Oo
STEREO AMPLIFIER
PeSOOK
Thank you for buying this PIONEER product.
Please read through these operating instructions so you will
know how to operate. your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of connect-
ing and operating the unit is the same.
WARNING: To prEVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This product complies with the Low Voltage Directive {73/23/
EEC), EMC Directives (89/336/EEC, 92/31/EEC} and CE Marking
Directive (93/68/EEC).
LINE VOLTAGE SELECTOR SWITCH
'Only multi-voltage models are provided with this
switch. European, U.K. and Australian models are
not provided with this switch.
Main voltages in Saudi Arabia are 127 V and 220 V
only.
Never use this modei with 110 V setting is Saudi
Arabia.
The line voltage selector switch is on the rear panel. Before
you model is shipped from the factory, this switch is set to
the power requirements of the destination. Check that it is
set properly before plugging the power cord into the AC wall
socket. If the voltage is not properly set or if you move to an
area where the voltage requirements differ, adjust the selec-
tor switch as follows.
1. Use a medium-size screwdriver.
2. Insert the screwdriver into the groove on the voltage se-
lector, and adjust so that the tip of the arrow points to the
voltage value of your area.
Sy
220V 240V
V10V F20V e7V
Medium-size screwdriver.
@ PIONEER'
The Art of Entertainment