Summary of Contents for Propel Trampolines PRO1432-COMBO
Page 1
14’ Heavy Duty Trampoline and Enclosure User Manual Assembly, Installation, Care, Maintenance, and User Instructions WARNING READ THESE MATERIALS PRIOR TO ASSEMBLING AND USING THIS TRAMPOLINE AND ENCLOSURE. Failure to assemble and use this trampoline and enclosure net combination as specified in this manual will automatically void the warranty.
Page 2
Do Not return this product to the store. Instead, please visit our website at www.PropelTrampolines.com where you will find our current contact information. Our friendly customer service staff can help you with any problems or questions that may arise during the assembly, installation, use, maintenance, or obtainment of replacement parts for your Trampoline.
TABLE OF CONTENTS BEFORE YOU BEGIN - 4 INSTRUCTIONAL MATERIAL AND RULES FOR USE - 5 OVERVIEW OF TRAMPOLINE AND ENCLOSURE COMBINATION USE - 8 INSTRUCTIONAL PROGRAM AND MODEL LESSONS - 9 FUNDAMENTAL TRAMPOLINE SKILLS - 10 PARTS LIST - 12 ASSEMBLY INSTRUCTIONS - 13 Attention FRAME ASSEMBLY - 14...
BEFORE YOU BEGIN Thank you for purchasing a Propel Trampoline and enclosure net combination. This trampoline and enclosure net combination comes equipped with warnings and instructions for its proper assembly, care, maintenance, and use. This information must be read by all supervisors and users before any person is allowed to use it. Follow all warning pictures shown below or otherwise included elsewhere in this manual.
INSTRUCTIONAL MATERIAL AND RULES FOR USE TIPS TO REDUCE THE RISK OF ACCIDENTS Do not use or stand near the trampoline in windy or gusty conditions. A trampoline can become airborne when exposed to sustained wind or gusty wind conditions. This can result in serious injury, paralysis, or death, as well as property damage.
Page 6
TRAMPOLINE SAFETY INSTRUCTIONS JUMPERS 1. Do not use trampoline if you have consumed alcohol or drugs. 2. Remove all hard and sharp objects from person before using trampoline. 3. You should climb on and off in a controlled and careful manner. 4.
Page 7
Warnings 1. DO NOT attempt or allow somersaults. Landing onto the trampoline when mounting. Do not use the on the head or neck can cause serious injury, trampoline as a springboard to other objects. paralysis, or death, even when landing in the middle 16.
OVERVIEW OF TRAMPOLINE AND ENCLOSURE COMBINATION USE The first practice sessions of your new trampoline and enclosure net combination should focus on learning fundamental body positions and practicing the eight basic jumps (see pages 8-9). During this learning period jumpers should practice these basic techniques and perfect them. Braking, or checking the jump should be taught first and stressed as a safety measure.
INSTRUCTIONAL PROGRAM AND MODEL LESSONS The following lessons are examples of an instructional program. They should follow a complete discussion and demonstration of body mechanics between the supervisor and the student(s). See pages 10 and 11 for descriptions of basic jumping skills. Lesson 1 1.
FUNDAMENTAL TRAMPOLINE SKILLS Knee Drop Fundamental Jump 1. Start bouncing from a standing position, 1. Start from a standing position with your head keeping your eyes on the frame pad. erect and your eyes on the frame pad. 2. Land on your knees, keeping your back straight 2.
Page 11
Front Drop Seat Drop 1. Start from a low bounce and land on the mat in 1. Land in a sitting position with your legs parallel a prone position. to the mat. 2. Keep your head up and your arms extended 2.
PARTS LIST Leg Brace x6 Legs x12 Frame Tube x12 Pad x1 Jumping Mat x1 Enclosure x1 Upper Enclosure Pole with Foam x6 Lower Enclosure Pole with Foam x6 T-Bracket A x6 T-Bracket B x6 Springs x84 Spring Puller Page 12...
ASSEMBLY INSTRUCTIONS WARNINGS • Adequate overhead clearance is essential. A minimum of 24 feet from ground level is recommended. Provide clearance for wires, tree limbs, and other possible hazards. • Lateral clearance is essential. Place the trampoline and trampoline enclosure net away from walls, structures, fences, and other play areas.
Frame Assembly Read and understand all assembly instructions before beginning the assembly process. Your trampoline frame is assembled using two types of t-brackets; type A (regular t-brackets) and type B (enclosure t-brackets). The enclosure t-bracket includes a special slot to insert an enclosure pole.
Page 15
Step 4 - Slide two leg tubes (C) onto a leg brace (D). One leg of each pair should have a safety sticker attached. The peak of the brace (D) should point toward the ground. Insert one of the leg tubes (C) into one of the t-brackets (which were previously assembled in step one).
Page 16
Step 5 – Rotate two leg sections so the spring holes are facing up and hold them in the positions shown in the figure below. Insert the crimped end of the frame tube of one section into the t-bracket (A) of another. Repeat this step;...
Enclosure Pole Assembly Read and understand all assembly instructions before beginning the assembly process. Your trampoline’s enclosure poles come in two sections; an upper (curved) and a lower (straight) section. Step 1 – Connect one upper pole section and one lower pole section together, making sure the hole and the snap button line up.
Page 18
Jumping Mat and Enclosure Net Assembly Read and understand all assembly instructions before beginning the assembly process. This trampoline should not be installed without the included enclosure safety net. Step 1 – Unfold and lay the jumping mat (jumping surface) on the ground inside the trampoline frame circle.
Page 19
Step 3 – Unfold the enclosure netting. Locate the zipper opening and ensure that the warning labels are facing outwards. Step 4 – Locate the webbing Straps sewn to the top edge of the Enclosure, feed the webbing through the plastic cap at the top of the enclosure pole. Once the webbing is through the plastic cap, thread the webbing through both D-rings.
Page 20
Step 7 – Now starting on the left side of the T-Bracket feed the short end of a new spring through the enclosure net near the bottom edge and attach it to the v-ring (as shown in figure 1 below). Now pull the spring back towards the frame using the included spring puller and insert the long end into the corresponding slot of the frame.
Page 21
Step 8 – You should now have one spring connected on both sides of each t-bracket (as shown in the picture below). Now remove the spring on the right side of each t-bracket and re-attach it through the enclosure netting to the corresponding v-ring on the jumping mat. Note, that from this point on when attaching springs they must be attached to the jumping mat through the enclosure net.
Safety Pad Assembly Read and understand all assembly instructions before beginning the assembly process. Step 1 – Lift the enclosure poles out of the t-bracket slots and lean them forward so they are resting on the jumping mat (as shown in the picture to the left).
Page 23
Step 4 – Locate bungee ties on the underside of the pad. There are bungees close the frame and the jumping mat. For the bungees close to the frame, loop the bungee around the frame and tie a bow knot, as shown below. Repeat this process until all the bungees close to the frame are tied.
Page 24
Step 5 – Lift the enclosure poles and insert them through the hole in the pad and into the t- bracket slot. Step 6 – Secure the Enclosure Poles to the Frame by inserting the enclosure pole into the T-Brackets. Be sure the snap button is protruding from the hole to ensure both parts are securely fastened.
WARNING LABEL PLACEMENTS Note: These labels are not shown at their actual size. These labels have been attached to the Trampoline Enclosure in the indicated locations. Please verify that none of these labels missing illegible. please contact us and request a free replacement.
MOVING THE TRAMPOLINE AND ENCLOSURE NET COMBINATION If the trampoline and enclosure net combination needs to be moved, it must be done by a minimum of two (preferably four) adults. Keep the trampoline horizontal and lifted slightly. If necessary, it can be taken apart for moving. DISASSEMBLY To disassemble (take apart) the trampoline and enclosure net combination, follow the trampoline and enclosure net combination assembly steps in reverse order.
Page 27
MAINTENANCE Your trampoline and enclosure net combination were manufactured using the highest quality materials. It was crafted to provide you and your family with years of enjoyment and exercise. Proper maintenance and care will help to prolong the life of your trampoline and enclosure net combination.
MY TRAMPOLINE INFORMATION In the event you need to contact customer service, such as to ask questions, order replacement parts, or file a warranty claim; you will be asked to provide some basic information about your trampoline. By writing this information in the spaces below and keeping this Manual in an accessible location, you can help expedite this process.
Propel Trampolines is not responsible or liable for indirect, special, or consequential damages arising out of, or in connection with the use or performance of this product. Propel is not responsible for other damages with respect to any economic loss, loss of property, loss of revenue or profits, loss of enjoyment or use, cost of removal or installation, and any other consequential damages.
Need help?
Do you have a question about the PRO1432-COMBO and is the answer not in the manual?
Questions and answers