Sony KP-48V80 Operating Instructions Manual page 21

Using the S-Link function with a
Sony AV receiver
1 Using a VIDEO cable, connect VIDEO 1
IN on the projection TV to MONITOR
OUT on the Sony AV receiver.
2 Using an AUDIO/VIDEO cable, connect
TV OUT on the projection TV to TV
AUDIO and VIDEO IN on the AV
receiver.
3 Using an S-LINK cable, connect S-LINK
on the VIDEO 1 IN panel on the
projection TV and S-LINK on MONITOR
OUT on the AV receiver.
4 Using an S-LINK cable, connect S-LINK
on the TV OUT panel on the projection
TV to S-LINK on TV IN on the AV
receiver.
5 Using AUDIO/ VIDEO and S-LINK
cables, connect the Sony video equipment
to the AV receiver.
6 Use the Audio menu to set "Speaker" to
"Off" or "Center." (see "Speaker" on
page 32)
7 Press CH (CHANNEL) +/- to activate
the S-Link function.
Refer also to the Operating
Instructions supplied with the VCR,
satellite receiver, DVD player, LD
player and other Sony video
equipment for details.
(Rear of projection TV)
Audio/video/
S-Link cable
(not supplied)
Video cable MONITOR OUT
{not supplied) (video output)
TV IN
(S-LINK, video/
audio inputs)
Audio/
video
MONITOR OUT
RK-G34, etc.
so S-LINK
S-LINK (not supplied)
" | Sony AV receiver
* VIDEO 1 IN
(S-LINK, video/
5 audio inputs)
Audio/video/
S-Link cable (not
supplied)
S-LINK
VIDEO 2 IN (S-LINK,
video
outputs
17