Preparations; Using The Av Cordless Ir System - Laser Link - Sony CPJ-A300E Operating Instruction

Preparations

Tip
This projector accepts
the video signals of
both NTSC and PAL
color systems.
Notes
• Turn off the video
equipment and the
projector before
connecting.
• Refer to the video
equipment's manual
as well.
• To connect the IR
transmitter to mains
use only supplied AC
power adapter,
because the polarity
of the supplied
adapter is opposite of
conventional
adapters. Do not use
the supplied AC
power adapter for
other electric
appliances with a DC
IN 9 V jack.
Polarity of the plug
There are two ways to receive picture and sound to
be projected from video equipment: by AV Cordless
IR (infrared rays) system or by directly connecting
video equipment.
Using the AV Cordless IR system –
LASER LINK
Connect the supplied IR transmitter to video
equipment such as a VCR or video camera recorder
using the supplied A/V connecting cable.
Connect the supplied AC power adapter to DC IN
9V of the IR transmitter and to the mains.
You do not need to connect the projector itself to
video equipment.
to VIDEO OUT
VIDEO
L
AUDIO
R
to AUDIO OUT
A/V connecting cable (supplied)
to mains
to mains
: Signal flow
IR transmitter
to
AUDIO IN
to
VIDEO IN
AC power adapter
(supplied to the
customers in European
Continent)
AC power adapter
(supplied to the
customers in U.K.)
Preparations
to
DC IN 9V
7
-GB