Advertisement
Instruction Leaflet IL02602014E – Rev. B
Transformer Temperature Controllers
Quick Start Guide
The purpose of this quick start guide is guide the user through the essential steps required to
commission an Eaton Transformer Temperature Controller. This quick start guide is not a
replacement for the complete manual which can be found on the CD shipped with your TC-100,
TC-50M, or TC-50. For wiring instructions and complete descriptions of the functions, please
consult the complete instruction manual.
Contents
Description
Section 1
Section 2
Front Panel Interface
Overview
Section 3
PC Application
Installation and
Overview
Page
1
2
3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eaton TC-100
Summary of Contents for Eaton TC-100
- Page 1 Eaton Transformer Temperature Controller. This quick start guide is not a replacement for the complete manual which can be found on the CD shipped with your TC-100, TC-50M, or TC-50. For wiring instructions and complete descriptions of the functions, please...
- Page 2 Eaton Corporation’s (“Eaton”) experience and judgment and may not cover all contingencies. If further information is required, an Eaton sales office should be consulted. Sale of the product shown in this literature is subject to the terms and conditions outlined in appropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser.
- Page 3 J7, the Alarm and WINDINGS Modbus Trip relay outputs on Network COMMON (TC-50 Modus connector J1, and Shield THERMOCOUPLE in CABINET TC-100 Only) the discrete inputs on AMBIENT AIR connector J1 as BURDEN desired. <1K OHM 4-20mA (+) 2 4-20mA LOOP...
- Page 4 The Up and Down Arrow buttons are used to scroll through the four temperature inputs in Max display mode and to navigate through the various front panel menus. Transformer Temperature Controllers Quick Start Guide IL02602014E – Rev. B March 2012 www.eaton.com...
- Page 5 Offline/Connected Device indicator in the upper right corner of the PC application indicates the state of the USB connection from the PC to a TC-100, TC-50M, or TC-50 device. The PC application will run without a TC device connected, but any features that require communications with the device will not function.
- Page 6 The Reports options provide the user with graphs and tabular reporting of parametric (‘Trend’ and ‘Fan Wear Indicator’) and event (‘Trip Log and Alarm Log’) data that was previously downloaded from one or more TC-100 units via the USB interface. The reports can be viewed on screen, exported for use by other applications, or printed for a hard-copy presentation.
Need help?
Do you have a question about the TC-100 and is the answer not in the manual?
Questions and answers