Table of Contents
Advertisement
3.4
3.5
How to select a
search mode
Available search
modes
Operation of the Locator
How to Locate a Utility
Status indicator
Audio Output
Signal Strength indic-
ator
Mode indicators
Indicator Icons
Battery indicator
Search Modes
Press the Function key on the locator keyboard to select a search
mode.
Search Mode
Auto mode
Power mode
Radio mode
Test pattern
On throughout test
sequence
Scrolls through in
sequence once
Briefly illuminated
Briefly illuminated
On throughout test
sequence
Description
Combined detection of Power and Radio modes.
☞
This mode facilitates a one-step sweep
search process.
This mode is used to detect electrical cables.
☞
Power mode is dependent on an electrical
current flowing through a cable. Keep in
mind that not all electrical cables carry a
detectable signal and thus pose a serious
risk, for example supplies to unilluminated
street lights, unoccupied buildings or bal-
anced three-phase cables.
This mode is used to detect metallic pipes or cables,
including telecoms and electrical.
☞
Radio mode is dependent on reradiated
radio waves originating from radio masts.
Keep in mind that signal availability can
vary or be restricted depending on factors
including line of site, signal application or
routine mast maintenance.
Info on label
0016753_001
21
Advertisement
Table of Contents
