1.5.2
12
WARNING
Improperly repaired equipment
Risk of injuries to users and equipment destruction due to lack of repair
knowledge.
Precautions:
▶
Only authorised Leica Geosystems Service Centres are entitled to repair
these products.
Using the Product with a Signal Transmitter
DANGER
Clipping a transmitter clamp around a live utility
When a transmitter clamp is clipped around a live utility, a hazardous signal
might be present on the utility or at the transmitter plug connector, causing
you to receive an electric shock.
Precautions:
▶
Do not clip a transmitter clamp around live utilities that have impaired or
no insulation.
▶
Always ensure that the transmitter plug connector is connected to the
transmitter before you clip the transmitter clamp around a live utility.
DANGER
Connecting the cable set of the transmitter to a live utility
Connecting the cable set of the transmitter directly to a live utility can cause
you to receive an electric shock.
Precautions:
▶
Never connect the cable set of the transmitter directly to a live electrical
utility.
DANGER
Power output of signal transmitter
The signal transmitter can output potentially lethal voltages!
Precautions:
▶
Take care when using the maximum power output of the signal transmit-
ter.
▶
Take care when handling exposed or non-insulated connections, including
the transmitter's cable set, the earth pin and the connection to the utility.
▶
Notify others who may be working on or around the utility.
WARNING
Battery pack of the signal transmitter may get hot after prolonged use
Risk of burning injuries.
Precautions:
▶
Avoid touching the hot battery pack.
▶
Allow the battery pack to cool down before removing it.
Safety Directions