Table of Contents
Advertisement
Height
Width
Depth
Depth with door open
Weight
Maximum load (cotton)
Maximum load (synthetics)
Drum volume
Power supply voltage
Total power
This appliance complies with the following EEC Directives:
- 73/23/EEC of 19/02/73 relating to low voltage
- 89/336/EEC of 03/05/89 relating to electromagnetic compatibility
Unpacking/damage during
transport
Please make sure that the appliance is not damaged.
Any damage must be notified to shipping company
immediately. Damage, mistakes and any missing parts
must be notified to dealer immediately. Keep
packaging materials away from children.
All materials marked with the
recyclable and must be taken to a special collection
point.
Installation
Install appliance on a flat floor or on a washing
machine. In any case, the appliance must be perfectly
horizontal. Check this by using a spirit level and make
any necessary adjustments to appliance's adjustable feet.
Please make sure that there is adequate ventilation
underneath the appliance and adequate air change
between the grid and base.
In consideration of the above, it is not advisable to
place the appliance on a carpet.
TECHNICAL SPECIFICATIONS
850 mm
600 mm
600 mm
1200 mm
46 kg
5 kg dry garments
2 kg dry garments
108 l
230 V, 16 Amp
2600 W, 16 Amp
INSTALLATION
symbol are
adjustable + 10 mm
61
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TCS 673 T and is the answer not in the manual?
Questions and answers
luz acesa tanque cheio ,bomba nao funciona !!
The Zanussi TCS 673 T may show the "Water container full" light because the water container is full and needs to be emptied. If the pump is not working, it could be due to a blockage or malfunction. Check the following:
1. Empty the water container: Refer to the cleaning instructions in the manual to empty the container properly.
2. Inspect for blockages: Ensure there are no obstructions in the drainage system or pump.
3. Verify proper installation: Confirm the appliance is installed on a flat, level surface with adequate ventilation.
4. Contact service: If the issue persists, contact a Zanussi Service Centre with the product, model, and serial numbers from the rating plate.
This answer is automatically generated