Lexus RC350 Manual page 226

226
8-1. Phone operation (Hands-free system for cellular phones)
Displaying the message screen
1
Press the "MENU" button on the
Remote Touch.
2
Select "Phone".
3
Select "Message" on the sub
menu.
4
Select a desired account name that
is displayed on the left side of
screen.
 Account names are the names of
the accounts that exist on the cur-
rently connected phone.
5
Check that the message screen is
displayed.
"Phone": Select to change to phone
mode.
 The following functions can be used
on message function:
• Receiving a message (P.226)
• Checking messages (P.227)
• Replying to a message (dictation
reply) (P.228)
• Replying to a message (quick reply)
(P.228)
• Calling the message sender
(P.229)
• Message settings (P.240)
Receiving a message
When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and is ready
to be operated on the screen.
Select to check the message.
A
Select to not open the message.
B
Select to call the message sender.
C
● To display the above screen, it needs to
be set to "Full Screen" on "Incoming
SMS/MMS Display" and "Incoming
E-mail Display". (P.233) Default set-
ting is "Drop-down".
Depending on the type of Bluetooth
●
phone used for receiving messages, or its
registration status with the system, some
information may not be displayed.
The pop-up screen is separately available
●
for incoming e-mail and SMS/MMS
messages under the following conditions:
E-mail:
• "E-mail Notification Pop-up" is set to on.
(P.233)
SMS/MMS:
• "SMS/MMS Notification Pop-up" is set
to on. (P.233)
● Depending on the type of Bluetooth
phone being connected, E-Mail function
cannot be used via Bluetooth
®
®
®
.