Samsung WMN4070TT User Manual page 3

2
Remove the screws from the back of the TV and fasten the 4 screws ⓑ onto the back of the TV with the enclosed assembly tool
until each of the screws projects out by 5mm. To hang the TV onto the adjustable mount, a projected part of at least 5 mm is nec-
essary.
Flat-type fastening hole
Hang the TV onto the wall mount and make sure to check if the TV has been installed properly onto the wall mount by
observing the assembled TV as you move the wall mount from left to right.
Take care not to hurt your fingers when you install the TV or adjust the wall mount.
Make sure to fix the wall mount onto the wall firmly. If the TV falls, it may result in injury or damage to the product.
3
Pull the wall mount brackets as far forward as possible and hang the TV onto the wall mount at the specified positions as
shown by the figure while 2 persons are holding the TV.
TV
After fixing the TV onto the wall mount, firmly fasten the 4 screws ⓑ so that the TV and
the wall mount are completely fastened.
(Fastening force: 10 ~ 15 Kg)