Instructions On Phone Link - Blaupunkt HONG KONG 650 Operating Instructions Manual

Please follow the below instructions to turn on debugging on your phone.
Some steps may be different on different phones please also refer to your mobile phone instruction manual.
1. Go to Settings
2. About Phone 3. Build Number
5 & 6. You will now see Developer mode activated
4. Tap on Build no for
under Developer Option
6 to 8 times
7. Turn on Developer 8. Switch on USB Debugging,
9. USB debugging is
Say OK to the message
Option
now ON
19
After the above connect the USB cable to radio & mobile