Page 2
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
Contents Contents Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel Setting mode Audible signals First use Set the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use Load cutlery and dishes The lower basket...
Page 4
Contents Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if… Technical data Hints for test institutes Installation instructions Installation Fixing to the adjacent units Levelling Water connection...
Safety information Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information General safety • Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher de- tergent manufacturer. • The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine.
Product description WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs. Product description Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm...
Control panel Control panel Programme selection buttons MULTITAB button Delay start button Indicator lights On/off button Function buttons Indicator lights Salt Illuminates when the special salt has run out. Rinse aid Illuminates when the rinse aid has run out. End of programme Illuminates when a washing programme has ended.
Control panel • the activation/deactivation of the rinse aid dispenser • the activation/deactivation of the audible signals can also be set with the help of these buttons. Setting mode The appliance is in setting mode when all programme lights are illuminated. Always remember that when performing operations such as: •...
First use 3. Press button C, the lights of buttons A and B turn off while the light of button C goes on flashing. At the same time the End of programme indicator light illuminates indicating that the audible signals are active. 4.
Set the water softener The water softener must be set in both ways: manually, using the water hardness dial and electronically. Water hardness Adjusting the water hardness Use of salt setting °dH °TH mmol/l manually electronically 51 - 70 91 - 125 9,1 - 12,5 level 10 43 - 50...
Use of dishwasher salt 2. Press simultaneously and keep pressed buttons B and C, until the lights of buttons A, B and C start flashing. 3. Press button A, the lights of buttons B and C turn off while the light of button A goes on flashing.
Use of rinse aid 3. Using the funnel provided, pour in the salt until the container is full. 4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. 5. Replace the cap tightly turning it clockwise until it stops with a click.
Daily use 2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". The dispenser holds about 110 ml of rinse aid, which is sufficient for be- tween 16 and 40 dishwashing cycles, depending upon the dosage setting. 3.
Load cutlery and dishes • Fill with dishwasher detergent. • Select a wash programme suitable for the cutlery and dishes. • Start the wash programme. Load cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
Load cutlery and dishes For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother- • Only wash stoneware in the dishwasher if it of-pearls handles. is specially marked as being dishwasher-safe by the manufacturer.
Load cutlery and dishes To make it easier to load larger dishes, the 2 plate racks on the right in the lower basket can be folded down. The cutlery basket WARNING! Long bladed knives stored in an upright position are a potential hazard. Long and/ or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
Load cutlery and dishes 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The upper basket Load smaller, fragile crockery and long, sharp cutlery in the upper basket.
Use of detergent Adjusting the height of the upper basket Maximum height of the dishes in: the upper basket the lower basket With upper basket raised 22 cm 30 cm With upper basket lowered 24 cm 29 cm The height of the upper basket can also be adjusted when it is loaded. Raising / lowering the upper basket: 1.
Use of detergent Fill with detergent 1. Open the lid. 2. Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2).
Multi-tab function Multi-tab function This appliance is equipped with the "Multi-Tab function", that allows the use of the "Multi-Tab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1"...
Washing programmes 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. 3. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing.
Select and start a washing programme Programme Degree of Type of Programme description Consumption val- soil load Mixed nor- Crockery, AUTO mal and cutlery, heavy soil pots and pans Light soil Crockery 30 MIN and cutlery Normal Crockery ECO 50° soil and cutlery 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water...
Page 24
Select and start a washing programme Close the dishwasher's door, the programme starts automatically. Setting and starting the programme with "delay start" 1. After having selected the washing programme, press the delay start button until the light corresponding to the chosen hours flashes (3h, 6h or 9h). 2.
Unloading the dishwasher Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. • Empty the lower basket first and then the upper one; this will avoid water drip- ping from the upper basket onto the dishes in the lower one.
Care and cleaning 3. Turn the handle about 1/4 a turn an- ticlockwise and remove the filter sys- tem. 4. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). 5. Clean all filters thoroughly under run- ning water.
Care and cleaning External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scour- ing pads or solvent (acetone, trichloroethylene etc..). Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
What to do if… What to do if… The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher and carry out the following suggested corrective actions.
Page 29
What to do if… Fault code and malfunction Possible cause and solution The programme does not start. • The dishwasher’s door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the main plug. •...
Technical data The wash results are not satisfactory The dishes are not clean • The wrong washing programme has been se- lected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.
Hints for test institutes Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes").
Page 32
Hints for test institutes Example loading arrangements: Upper basket Lower basket with cutlery basket Cutlery basket 1) If there are cup racks in place on the lefthand side, remove them.
Installation Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or work surface.
Water connection Water connection Water supply connections Connection to a cold water supply is advised. If connection is made to a hot water supply the maximum permissible temperature is 60°C. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot.
Water connection • The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water. • If water inlet hose or the safety valve is damaged, remove the mains plug immediately.
Electrical connection The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.
Environment concerns Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Need help?
Do you have a question about the FAVORIT 44010 VI and is the answer not in the manual?
Questions and answers