Using The Remote Control - Sony FD Trinitron WEGA KV-32XBR400 Operating Instructions Manual

Other Information
Using the Remote Control
The following table describes the buttons on the remote control that
are for more advanced functions.
Button Descriptions
MUTING
POW!
VCRDVD SAT/CABLE
Os @)
TURE
MODE SLEEP DISPLAY ANT
jC Co: GS
FUNCTION
VCRIDVO SATICABLE TV
FREEZE
Somes
-_
AVi230VD RM-Y174
40
&) Main Power button must be turned ON to activate the Remote Control.
Outside Panel
Button
MUTING ©
VCRDVD
(POWER)
SAT/CABLE
(POWER)
TV (POWER) _
PICTUREMODE
SLEEP
DISPLAY
GUIDE
0-QandENTER
JUMP
TVVIDEO |
VCR/DVD
(FUNCTION)
SATICABLE
(FUNCTION)
Description
Press to mute the sound. Press again or press VOL + to
restore the sound.
Turns the DVD player, MDP player, or VIR (VCR) on
and off.
Turns the satellite receiver or cable box on and off.
Turns the TV on and off.
Press repeatedly to step through the available video
picture modes: Vivid, Standard, Pro, Movie. Also available
in the Video menu. For details, see "Selecting Video
Options" on page 26.
Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV to
remain on before shutting off automatically. Cancel by
pressing until SLEEP OFF appears. While Sleep feature is
set, press once to view remaining time
Press once to display the current time and channel label
(if set) and channel number. Press again to turn Display
off. See page 34 for details on \ setting | the time.
~ Changes the VHF/ UHF i input to the AUX input.
_ Displays the program guide of your satellite antenna.
Press 0 — 9 to select a channel, the channel changes after
2 seconds. Press ENTER for immediate selection.
Press toj jump > back and forth between two channels. The
TV alternates between the current channel and the last
channel that was selected.
Cycles through available video inputs: TV, VIDEO 1, VIDEO 2,
VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6.
Activates the remote control for use with a DVD player,
MDP, or VTR (VCR).
Activates the remote control for use with a satellite
receiver or cable box.
Activates the remote control for use with the TV.