Technics SL-PD887 Operating Instructions Manual page 5

No._Name_Ref, page
© Power "STANDBY 6/ON" switch
(POWER, STAN DBY 6 /ON) 7
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a smalt
amount of power.
© ID scan button (ID SCAN)
SL PD887 only
(D Edit guide button (EDIT GUIDE)
SL PDSaZ only
@ "STANDBY" Indicator (STANDBY)
When the unit is connected to the AC mains supply, this in¬
dicator tights up in standby mode and goes out when the unit
is turned on.
® Remote control signal sensor (SENSOR) —
For SL-PD687
The word "SENSOR" does not appear on the panel, but if
you have an amplifier (or receiver) with remote control
transmitter which is manufactured by Technics, it is possible
to operate the main unit using this remote control transmitter.
(Some remote control transmitters cannot be used.)
(D Display
—
© Disc buttons (DISC 1—5)
7
(g) Disc skip button (DISC SKIP)
7,14
No._Name_Ref. page
® Time mode button (TIME MODE) 15
(Q) Spiral button (SPIRAL) ' 12
(g) Random mode button
(RANDOM MODE) 10
(Q) Repeat button (REPEAT) 15
(Q) Numeric buttons (1 -10, 0, >10) 8
® Loading drawer 7
® Stop button (■) 8
® Pause button (II) 8
® Play button (^) 8
® Search buttons {MA SEARCH ►^)
13
® Skip buttons (SKIP ►N)
14
@) Loading drawer open/close button
(A OPEN/CLOSE) 7
@ Disc trays (1-5) 7
(D Program mode button
(PROGRAM MODE)
9,11