Technics SU-A900 Operating Instructions Manual page 5

Æ "TAPE 2" terminals
Connect to a second tape deck (Tape deck 2) or a graphic
equalizer, etc.
Tape deck 2 (not included)
REC(IN) PLAY(OUT}
œŒ Q
© C "TAPE 1" terminals
Connect to a first tape deck (Tape deck 1) or a digital compact
cassette deck (DCC), atc.
Tape deck 1 (not included)
@ ("REMOTE CONTROL OUT" terminal
This terminal can be used only with Technics tape deck and com-
pact disc player which have the appropriate remote control ter-
minal. (Consult your dealer for details.)
Proper connection with remote control connection cables will
allow control of some functions from this unit's remote control
transmitter. (See pages 12—13 for details.)
Connect to a tape deck and/or compact disc player as shown
below,
If a tape deck is not being used, the compact disc player can be
connected directly (dotted line).
This unit
REMOTE
@ CONTROL
OUT
Connection cable
for remote control
(included with tape
deck)
Tape deck
(not included)
REMOTE
Q CONTROL
;
2 =
Connection cable
for remote control
(Included with
compact disc
r=-
Compact disc
player A
(not included) REMOTE =
For a compact disc player with a remote control sensor, the
above connection is not necessary.
To set the power voltage
For areas except United Kingdom, Europe, Australla and
N.Z.
CoE,
CODCOD
Set the voltage selector to "110 V—127 V" or "220 V-240 V"
according to the area in which the unit will be used.
{Use a minus (—) screwdriver]
Note:
Note that this unit will be seriously damaged if this setting is not
made correctly.
There is no cooling fan for some countries.
The coofing fan operates at high power output levels only.