Technics SU-A900 Operating Instructions Manual page 12

Remote Control Operation
*This remote contro! transmitter can be used to operate
Technics CD players and tape decks which are equipped with
remote control terminals or remote contro! sensors, or to
operate Technics tuners which are equipped with remote con-
trol sensors, Consult your dealer for details.
For detailed information concerning operation steps, etc.,
please refer to the appropriate page for each unit and the
NOTE:
Face this remote control transmitter toward the main unit to
operate the main unit or other units which are connected to
the main unit by means of a remote control cable (See paga
5).
To operate any other unit, face this remote control transmitter
toward that unit.
respective operating instructions.
e Make sure that the power of each unit is set to the "ON" posl-
tion before beginning the operations.
To operate the amplifier
To select an input source
OO. 6
APE! TAPE2
To adjust the volume level
To operate the tuner
To select the desired channel sequentialy
vw AN
preset CD (_)
Select the desired
preset channel.
To select the desired channel directly
Specify the preset channel
210
GÖ O +Ò Ô
Note:
When you want to select further channels, you do not have to press the "TUNER" button
again.
To select the desired band
TUNER pisc/sano The band changes
O =» O each time the
button is pressed.
Note:
When you want to change the band, you do not have to press the "TUNER" button again.