Advertisement
Auto Store
are stored on program numbers in the same sequence as they are found. After Auto Store is
started, the TV starts searching for a TV channel. When a TV channel is found, it will be
through all TV systems and.
The TV syster .— -
TV systems ar
res all TV channels available.
m FRANCE
(SECAMLU)
:m EUROPE
(PAL/SECAM BG)
:m UK
(PALI)
> INSTALLATION menu appears,
o Press + (YES) to start the AUTOSTORE ftinction.
The Auto Store can be stopped by pressing the two buttons 0 and<> simultaneously.
(69.
To reorganize the sequence of the TV channels stored by the Autostore, refer to the se
"Storing TV channels" following steps 1,4, 5.
Operation
On Screen Display
The On Screen Display (OSD) information allows you to see the program number on which a
TV channel is stored, the timer status and a moving bar if the volume is adjusted.
Press G) to display information on the screen.
Press CD again to switch off information.
Selecting TV channels
Volume control^
O Press |J£ to switch off the so
o Press ij$< again or
+ to;
Menu on screen
You can also set the timer, select the screen format and pre-select the external electronic
equipment connected to the TV.
are initially stored by the factory. Using the menu on screen you can change these values. If you
store these values (by pressing the two buttons ^ and O' simultaneously after a change), the
TV will switch on with your stored picture and sound values.
If you want to leave the menu, for example after changing the contrast setting, you can either wait
approximately 10 seconds or continue to press the MENU button until the menu disappears from the
Advertisement
