Multiparty Or Conference Calls - LG G5220 User Manual

Additional Functions

2 Multiparty or Conference Calls

The multiparty or conference service provides you with the ability to have
a simultaneous conversation with more than one caller, if your network
service provider supports this feature.
A multiparty call can only be set up when you have one active call and one
call on hold, both calls having been answered. Once a multiparty call is set
up, calls may be added, disconnected or separated (that is, removed from
the multiparty call but still connected to you) by the person who set up the
multiparty call. These options are all available from the in-call menu and
are listed in Section.
The maximum callers in a multiparty call is five. Once started, you are in
control of the multiparty call, and only you can add calls to the multiparty
call.
2-1 Making a Second Call
You can make a second call while you are already in a call. To do this,
enter the second number and press [Send]. When you get second call
the first call is automatically put on hold. You can swap between calls by
selecting the [Options] key then Swap.
2-2 Setting up a Multiparty Call
You can connect a call on hold to the currently active call to form a
multiparty call by selecting the [Options] key then Multiparty/Join all.
2-3 Putting the Multiparty Call on Hold
To put a multiparty call on hold, select the [Options] key then
Multiparty/Hold all.
2-4 De-activate the Multiparty Call on Hold
To de-activate a multiparty call on hold, select the [Options] key then
Multiparty/Join all.
2-5 Adding Calls to the Multiparty Call
To join an active call to the held multiparty call, select the [Options] key
then Multiparty/Join all.
75