Multiparty Or Conference Calls - LG C2100 User Manual

If Call Waiting is on, you can put the first call on hold and
answer the second, by pressing S [Send] or by
selecting < [Answer], then Hold & Answer.
You can end the current call and answer the waiting call
by selecting < [Menu], then End & Answer.
1-5 Rejecting an Incoming Call
When not in a call you can reject an incoming call without
answering it by simply pressing the E [End].
When in a call you can reject an incoming call by pressing
the < [Menu] key and selecting Multiparty/Reject or by
pressing E [End] key.
1-6 Muting the Microphone
You can mute the microphone during a call by pressing
the < [Options] key then selecting Mute. The handset
can be unmuted by pressing the < [Unmute].
When the handset is muted, the caller cannot hear you,
but you can still hear them.
1-7 Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, for example, to allow
your handset to make use of an automated switchboard,
select < [Options], then DTMF On. DTMF tones can be
turned off the same way.
1-8 Calling up Messages and SIM Tool kit main menu
The Messages and SIM Tool kit main menu options can
be reached from the in-call menu by selecting <
[Options]. SIM Tool kit menu is shown only when SIM in
the handset supports SIM Tool kit service.

2 Multiparty or Conference Calls

The multiparty or conference service provides you with
the ability to have a simultaneous conversation with more
than one caller, if your network service provider supports
this feature.
A multiparty call can only be set up when you have one
active call and one call on hold, both calls having been
answered. Once a multiparty call is set up, calls may be
added, disconnected or separated (that is, removed from
the multiparty call but still connected to you) by the
person who set up the multiparty call.
The maximum callers in a multiparty call is five. Once
started, you are in control of the multiparty call, and only
you can add calls to the multiparty call.
2-1 Making a Second Call
You can make a second call while you are already in a
call. To do this, enter the second number and press S
[Send]. When you get second call the first call is
automatically put on hold. You can swap between calls by
selecting < [Options] then Swap.
17
C2100