Table of Contents
Advertisement
116
Vehicle Care
7. Make sure the tire is stored securely and
flush in the radius (2) of the spare tire
support bracket (1). Push, pull, and then
try to turn the tire. If the tire moves,
use the wheel wrench to tighten the
cable.
Repeat this tightness check procedure
when checking the spare tire pressure
according to the scheduled maintenance
information or any time the spare tire is
handled due to service of other
components.
Correctly Stored
Incorrectly Stored
8. Reattach the hoist shaft access hole
cover on the bumper.
Advertisement
Chapters
Table of Contents
