Table of Contents
Advertisement
Safety
DANGER!
This combination of symbol and signal words
indicates an imminently dangerous situation which
may lead to death or severe injuries if they are not
avoided.
WARNING!
This combination of symbols and signal words
indicates a possibly dangerous situation which may
lead to death or severe injuries if they are not avoi-
ded.
CAUTION
!
This combination of symbol and signal words
indicates a possibly dangerous situation which may
lead to minor or light injuries if they are not avoided.
ATTENTION
!
This combination of symbol and signal words
indicates a possibly dangerous situation which may
lead to property and environmental damages if they
are not avoided.
NOTE!
This combination of symbol and signal words
indicates a possibly dangerous situation which may
lead to property and environmental damages if they
are not avoided.
Tips and recommendation
Tips and recommendation
This symbol highlights useful tips and
recommendation as well as information for all
efficient and trouble-free operation.
It is necessary to observe the safety notes written in
these operating instructions in order to reduce the risk of
personal injuries and damages to property.
2.2 General safety instructions
The following should be noted:
- Use the protective devices and fasten them securely.
Never work without guards and keep them in working
order.
- Always keep the fan and its working environment clean.
Ensure that there is sufficient lighting.
- Switch off the ventelator and disconnect the mains plug
before replacing operating equipment and wearing
parts.
4
- The fan must not be modified in its design and must not
be used for purposes other than those intended by the
manufacturer.
- Never work under the influence of diseases that impair
concentration, overtiredness, drugs, alcohol or medica-
tion.
- Do not pull on the power cord to unplug it from the wall
outlet. Protect the cord from heat, oil and sharp edges.
- Never use the power cord to move or lift the fan.
- Immediately eliminate any malfunctions that affect
safety.
- The fan must not be connected via an external swit-
ching device, e.g. a timer.
- Ensure a minimum fan distance of 1 meter.
- Before each use, make sure that no parts are damaged
on the fan.
- Damaged parts must be replaced immediately to avoid
sources of danger.
- Do not stack the fans on top of each other.
- Do not insert any objects into the openings. Do not use
the unit with the openings blocked; keep it free of dust,
lint, hair, and anything that can reduce airflow. Keep
your hair, clothing, fingers and all body parts away from
openings and moving parts.
- Do not use immersed in water or standing in water.
There is a risk of electric shock. To avoid electric
shock, do not expose the unit to rain.
- Store it indoors only. Do not expose the
- Do not expose the unit to freezing temperatures.
- Do not use flammable cleaning agents to clean this de-
vice.
- Never cover the fan with a blanket or similar.
- Do not overload the fan! You will work better and safer
in the specified power range.
- Always use the fan with the protective cover installed to
avoid contact with the propeller.
- Do not pour highly flammable solvents or petroleum-ba-
sed chemicals through the inlet grille.
- The fan is not intended for operation in wet or damp
areas.
- Operate the fan on a straight and stable surface to pre-
vent it from falling and to avoid injury or damage.
- Use only original spare parts and accessories to avoid
possible dangers and risks of accidents..
2.3 Safety data sheets
Safety data sheets on hazardous materials can be obtai-
ned from your specialist dealer or by calling +49 (0)951/
96555-0. Specialist dealers can find safety data sheets
in the download area of the partner portal.
MV-Series | Version 2.01
Advertisement
Table of Contents
