0951 96555-119 Email: ersatzteile@stuermer-maschinen.de You have made a good choice by purchasing the UNICRAFT fan. We are always interested in information and experiences that arise from the application and can be valuable for Read the operating instructions carefully before the improvement of our products.
Safety - The fan must not be modified in its design and must not be used for purposes other than those intended by the manufacturer. - Never work under the influence of diseases that impair DANGER! concentration, overtiredness, drugs, alcohol or medica- This combination of symbol and signal words tion.
Intended use Intended use 2.4 Personal protective equipment The personal protective equipment serves to protect per- sons against impairments of safety and health while The fan is used exclusively for extracting and distributing working. The staff member has to wear personal air and for cooling and drying objects.
Technical Data Technical Data 4.3 Dimensions 4.1 Table MV 30 MV 50 Impeller-Ø [D] 300 mm 500 mm Basket-Ø [D1] 380 mm 580 mm Supply voltage 230V/50 Hz 230V/50 Hz Fig. 3: Dimensions Speed 2800 min 1400 min Drive motor 500 W 1100 W Dimensi-...
Transport, packaging, storage Transport, packaging, storage Operation Use protective gloves! 5.1 Transport Check the mobile fan after delivery for visible transport damage. If you discover any damage, immediately report Wear protective clothes! it to the transport company or the dealer. DANGER! NOTE! Danger to life through electric...
Care, maintenance and repair Care, maintenance and repair Disposal, recycling of used equipment 7.1 Care by cleaning In your own interest and in the interest of the environ- The mobile fan must always be kept in a clean condition. ment, please ensure that all components of the equip- ment are only disposed of in the designated and appro- ATTENTION! ved ways...
Spare parts Example Spare parts The protective grid for the mobile fan MV 30 must be or- dered. The protective grid is identified in the spare parts DANGER! drawing with the number 2. Risk of injury due to use of incor- rect spare parts! When ordering spare parts, send a copy of spare parts The use of incorrect or faulty replacement parts may...
Spare parts 9.2 Spare parts drawing The following drawings should help you to identify necessary spare parts in case of service. Fig. 6: Spare parts drawing MV 30 Fig. 7: Spare parts drawing MV 50, MV 60 and MV 80 Fan | Version 2.01...
According to Machinery Directive 2006/42/EC Annex II 1.A Manufacturer / distributor: Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26 D-96103 Hallstadt hereby declares that the following product Product group: Unicraft® Workshop technology Type of machine: Mobile Fan Designation of machine*: Item number: MV 30 6260030...