Power Tool Use And Care; Use And Handling Of The Cordless Electrical Power Tool; Service - Parkside PFDFA 20-Li A1 Translation Of The Original Instructions

Cordless biscuit jointer 20v
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

4 . Power tool use and care

a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed .
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is danger-
ous and must be repaired .
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally .
d) Store idle power tools out of the reach of
children. Do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users .
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools .
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control .
g) Use the power tool, accessories and tool bits,
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation .
5 . Use and handling of the cordless
electrical power tool
a) Charge rechargeable batteries only in
chargers recommended by the manufacturer.
Chargers are often designed for a particular
type of rechargeable battery unit . There is the
danger of fire if other types of rechargeable
battery units are used .
PFDFA 20-Li A1
b) Only the rechargeable battery units supplied
are to be used with an electrical power tool.
The use of other rechargeable battery units may
lead to the danger of injury or fire .
c) When they are not being used, store re-
chargeable battery units away from paper-
clips, coins, keys, nails, screws or other small
metal objects that could cause the contacts to
be bridged. Short-circuiting the contacts of a
rechargeable battery unit may result in heat
damage or fire .
d) Fluids may leak out of rechargeable battery
units if they are misused. If this happens,
avoid contact with the fluid. If contact occurs,
flush the affected area with water. Seek addi-
tional medical help if any of the fluid gets into
your eyes. Escaping battery fluid may cause
skin irritation or burns .
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
able battery from heat (for example, from
continuous exposure to sunlight), fire, water
and moisture. There is a risk of explosion .

6 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained .
b) Never try to repair damaged batteries.
Batteries should only be maintained by the
manufacturer or an approved customer service
centre .
Protect the recharge-
GB │ IE
 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

438488 2304

Table of Contents