Table of Contents
Advertisement
Installation
Building in the coffee machine
Danger of injury due to incorrect
operation.
A machine that has not been built in
is not safe and can cause injuries.
Only ever use the coffee machine
once it has been built-in.
Danger of damage due to
incorrect operation.
If the ambient temperature range is
not observed, the coffee machine
may not function properly.
Only ever operate the coffee
machine when the ambient
temperature is within the range of
60-100°F (16-38°C).
Maintain a minimum installation
height of 33 1/2" (850 mm).
11 3/4"
(299mm)
Tip: If a gap of at least 11 ¾" (299 mm)
is maintained between the wall and the
coffee machine, you will be able to
open the appliance door wider, making
the machine easier to use. For instance,
it will be easier to remove the left-hand
bean container.
86
To install the machine, you will need a
TX 20 screwdriver.
Tip: We recommend providing a place
to sit the coffee machine which is the
same height as the building-in niche.
This will make it easier to connect the
appliance to the electricity supply.
Connecting the electricity supply
Observe the information under
"Electrical connection".
Connect the coffee machine to the
electricity supply.
Removing the shipping struts
There is a red silicone plug inside the
screw hole which secures the appliance
door during transport to prevent
transport damage.
Remove the silicone plug before
screwing the coffee machine to the
cabinet.
Pull firmly on the red silicone plug to
remove it from the screw hole.
Advertisement
Table of Contents
