JVC KD-G320 Instructions Manual page 166

Symptoms
• A longer readout time is required
("CHECK" keeps flashing on the
display).
• Tracks do not play back in the order
you have intended them to play.
• Elapsed playing time is not correct.
• "NO FILES" appears on the display.
• Correct characters are not displayed
(e.g. album name).
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on
the display.
• The CD changer does not work at all.
• The iPod or D. player does not turn
on or does not work.
• Buttons do not work as intended.
• The sound is distorted.
• "NO IPOD" or "NO DP" appears on
the display.
• Playback stops.
• No sound can be heard when
connecting an iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display
when connecting a D. player.
• "NO FILES" or "NO TRACK"
appears on the display.
• "RESET 1" – "RESET 7" appears on
the display.
• "RESET 8" appears on the display.
• The iPod's or D. player's controls do
not work after disconnecting from
this unit.
20
All manuals and user guides at all-guides.com
Do not use too many hierarchies and folders.
Playback order is determined when the files are
recorded.
This sometimes occurs during play. This is caused
by how the tracks are recorded on the disc.
Insert a disc that contains MP3/WMA tracks.
This unit can only display letters (upper case),
numbers, and a limited number of symbols.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
Press the reset button of the CD changer.
Reset the unit (see page 2).
• Check the connecting cable and its connection.
• Update the firmware version.
• Change the battery.
The functions of the buttons have been changed.
Press MODE before performing the operation.
Deactivate the equalizer either on the unit or the
iPod/D. player.
Check the connecting cable and its connection.
The headphones are disconnected during
playback. Restart the playback operation using the
control panel (see page 14).
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then,
connect it again.
No tracks are stored. Import tracks to the iPod or
D. player.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
Check the connection between the adapter and
this unit.
Reset the iPod or D. player.
Remedies/Causes