JVC KD-G320 Instructions Manual page 14

Indications
WOOFER* 1
Subwoofer cutoff
frequency
EXT IN*
2
External input
L/O MODE
Line output mode
TAG DISP
Tag display
AMP GAIN
Amplifier gain
control
AREA
Tuner channel
interval
* 1 Displayed only when "L/O MODE" is set to "WOOFER."
* 2 Displayed only when one of the following sources is selected—FM, AM, or DISC.
14
All manuals and user guides at all-guides.com
Selectable settings, [reference page]
LOW : Frequencies lower than 90 Hz are sent to the subwoofer.
MID : [Initial]; Frequencies lower than 135 Hz are sent to the
subwoofer.
HIGH : Frequencies lower than 180 Hz are sent to the subwoofer.
CHANGER : [Initial]; To use a JVC CD changer, [9], a JVC compatible
satellite (SIRIUS/XM) tuner, [15], an Apple iPod or a JVC
D. player, [18].
EXT IN : To use any other external component than the above,
[20].
When connecting amplifiers and/or subwoofer, set this correctly.
REAR : [Initial]; Select if the both LINE OUT terminals are
used for connecting the speakers through the external
amplifiers.
WOOFER : Select if the FRONT LINE OUT terminals are used for
connecting a subwoofer through an external amplifier.
TAG ON : [Initial]; Shows the Tag information while playing MP3/
WMA tracks, [10].
TAG OFF : Cancels.
You can change the maximum volume level of this unit.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power of
the speaker is less than 50 W to prevent them from being
damaged.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
AREA US : [Initial]; When using in North/Central/South America.
AM/FM intervals are set to 10 kHz/200 kHz.
AREA SA : When using in South American countries where FM
interval is 100 kHz. AM interval is set to 10 kHz.
AREA EU : When using in any other areas. AM/FM intervals are set
to 9 kHz/50 kHz (100 kHz during auto search).