Beko BFC60VMX1 User Manual page 29

4. Repeat the same procedure to remove the second
and third
Plastic part
2 The first step to regroup the door is reinstalling second
2. and third inner glass panels (2, 3).
1 Innermost glass panel
2 Second inner glass panel
3 Third inner glass panel
4 Outer glass panel
5 Plastic glass panel slot-Lower
As illustrated in figure, raise the innermost glass panel
slightly in direction A and pull it out in direction B.
As illustrated in figure, place the chamfered corner of
the glass panel so that it will rest in the chamfered
corner of the plastic slot.
Since the second and third inner glass panels are
interchangeable, their order of installation is not
important.
When installing the innermost glass panel (1), make
sure that the printed side of the panel faces towards
the second glass panel.
It is important to seat lower corners of all inner glass
panels into the lower plastic slots (5).
Push the plastic part towards the frame until you hear
a "click".
29/EN