Beko BFC60VMX1 User Manual page 20

IIDANGER:
too not allow any object to drop on the hob.
JL-..L...)Even small objects such as a saltshaker may
damage the hob.
Do not use cracked hobs. Water may leak
through these cracks and cause short circuit.
In case of any kind of damage on the surface
(eg., visible cracks), switch off the product
immediately to minimize the risk of electric
shock.
Glass ceramic hob is equipped with an operation light
and a hot zone warning indicator.
Hot zone warning indicator indicates the status of the
active zone and it remains lit after the plate is turned
off. When the temperature of the plate cools down to a
level that it can be touched by hand, warning indicator
turns off. Flickering of the hot zone warning indicator is
not a failure.
heating glass-ceramic hobs emit a
light when they are switched on. Do not
at the bright light.
Turning on the ceramic plates
The hob control knobs are used for operating the
plates. To obtain the desired cooking power, turn the
hob control knobs to the corresponding level.
20/EN
Turning off the ceramic plates
Turn the plate knob to OFF (upper) position.
Using multi-segmented cooking zones
Multi-segmented cooking zones allows to cook with
different size of saucepans on the same cooking zone.
When these cooking zones are activated, first the
inward cooking zone turns on.
1. To change the active cooking zone diameter, turn
the control knob clockwise.
2. A "click" will be heard as soon as the hotplate
radius chan es.
Turning off multi-segment cooking zones
1. Turn the knob counter clockwise to OFF (upper)
position to turn off the oven. All segments of the
2
3
zone are turned off.
Position 1
Position 2
Position 3
Position 2 and 3 of the multi-segment
cooking zones do not operate
independently.