Toshiba 46HM95 Service Manual page 11

8. STATUS CHECK MODE
1) Press "9" button thrice on Remote Control during display of adjustment menu in the service mode. The status of this
model will begin to check.
2) During Status Check, the following displays are shown.
1
2
3
4
5
1
MAIN :
Main source information :
Display RF position number (1 - 135) on the main screen, or Input Source (ANT1/2, CABLE, TV etc.)
2
MAIN FORMAT :
Display Video and PC format information
3
MAIN PLL :
Main PLL information : Display 1 byte data at five.
4
SCREEN SIZE :
Display the screen size as follows.
Theater Wide 1
Theater Wide 2
Theater Wide 3
FULL
NATURAL
5
OTHER STATUS :
Other status information : Display three numbers of 2 byte data.
- 7 -