Whirlpool GSC278 Use & Care Manual page 14

Built-in electric convection oven
Hide thumbs Also See for GSC278:
Table of Contents

Advertisement

ToRep .
1. Make sure door removal pins have not been removed. Fit
hinge arms into slots in flame. Push in at lower comer to
ensure hinge arms are fully engaged.
Open the doorcompletelyand removethe door removalpins.
Save them for future use.
3. Close oven door. If the door does not operate freely, repeat
the process.
TROUBLESHOO'I G
Try the solu_ons suggested here first in order to avoid the
cost of an unnecessary service call.
ii
ii
i
ii
,,,i llll
No_ng _U operete
Has • household fuse been blown or has the circuit
breaker been tripped?
Replace the fuse or reset the circuit.
Is the appliance wired properly?
See installation Instructions.
o_n _
not operete
is the electronic oven control set correctly?
See "Electronic Oven Control" section.
Has a deidy start been set?
See "Timed Cooking" section.
On _me
models, is the Control Look set?
See "Control Lock= section.
On some models,
is the Sabbath
Mode set?
See =sabbath Mode" section.
On double oven models, is one oven self-cleaning?
When one oven is self-cleaning the other oven cannot be set
or turned on.
On double oven models, has the correct oven been
selected?
Choose UPPER OVEN or LOWER OVEN first.
O_nWtoo
I_h ortooinw
Does the oven temperature
cali_
need adjustment?
See "Oven Temperature Control" section,
Dt_lay _
m_segas
,
,i,
,=
Is the display showing =PIP', "PF id:27" or "IF id=30"?
There has been a power failure. Clear the display. See
"Display(s)" section. On some models, reset the clock, if
needed. See "Clock" section.
|e the display showing a letter followed by a number?
Clear the display. See "Display(s)" section. If it reappears, call
for service. See "Assistance or Service" section.
,,i,,H
ll,ll
=
i
s_f-c_ming cyclewil notoperate
i
i
Is the oven door open?
Close the oven door all the way.
Has the function been entered?
See "Serf-Cleaning Cycle" section.
On some models, has a delay start Self-Clean cycle been
set?
See "Serf-Cleaning Cycle" section.
Has
• dohly
et_
_
Ht_
See "Timed Cooking" section.
On double oven models, is one oven soft-cleaning?
When one oven is self-cleaning,
the other oven cannot be set
to self-clean.
Oveno_dng nmits notwhataspired
Is the appliance level?
Levelthe appliance. See the Installation Instructions.
Is the preper tentl_Wature sot?
Double-chenkthe recipein a reliablecookbook.
Is the proper oven temperature
calibration set?
See "Oven Temperature Control" section.
Was the oven preheated?
See "Baking and Roasting" section.
Is the proper bakeware being used?
See =Bakeware"section.
Are the recks positioned propedy?
See "Positioning Racks end Bakewam"section.
IS there proper air circulation around bakeware?
See "Positioning Racks end Bakeware" section.
Is the batter evenly distributed in the pan?
Check to make sumbatter is level in the pan.
Is the proper length of time being used?
Adjustcookingtime.
Has the oven door been opened while cooking?_'
Oven peeking mlossas oven heat and can result in longer
cooking times.
Axe baked items too brown on the bottom?
Move rack to higher position in the oven.
Arepie orust odg_ brewningsorlyt
Use eluminumfoil
to cover the edge of the crust.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ygsc278Gsc308Ygsc308

Table of Contents