Yamaha YMC10 Owner's Manual page 7

(Т|РОМЕВ SWITCH
This turns the unit on. (Check connections first.)
2|POWER INDICATOR
When the power switch is on, the LED will be lit.
31MIDI CONNECTORS
These send and receive MIDI signals.
[iN] MIDI input jack
When the YMC10 is in MIDI IN mode, signals. from the
sequencer or rhythm machine are received here,
[OUT 1, 2| MIDI output jacks
When the YMC10 is in TAPE IN mode, the tape sync
signals are converted into MIDI signals and sent from these
jacks. Connect these jacks to the MIDI device you want to
synchronize with the tape. OUT 1, 2 both send the same
signals.
When the YMC10 is in MIDI IN mode, the two MIDI OUT
jacks function as MIDI THRU jacks.
4|MODE SELECT SWITCH
This selects MIDI IN mode or TAPE IN mode. In MIDI IN -
mode, MIDI start, continue, timing clock and stop signals
are converted into FSK tape sync signals.
When the YMC10 is in TAPE IN mode, it will receive FSK -
tape sync signals coming into the TAPE IN jack, and will
convert them to MIDI start, timing clock and stop signals.
|B; TAPE SYNC JACKS
Input.and output jacks for the tape sync signal.
OUT
. When in MIDI IN mode, FSK tape sync signals are sent
from this jack.
IN |
When in TAPE IN mode, the recorded tape sync signal
comes into this jack.
6 DC 12V JACK: РАТ (B,C)
Connect the PA1 (B,C) AC adaptor (included) to this jack.
Use only the PA1 (B,C) AC adaptor.