Kawai PN70 Owner's Manual page 5

Hide thumbs Also See for PN70:

Side view

Rear view

(H)

(В)

NOTE:

3. Hold (B) behind (A) and (C). Fasten

(A) and (B) with four screws (H) and

with three screws (G).

4. Place the piano on the stand. Then, slide

the piano backward to place it at the

appropriate point for screws.

Hold the

piano on the stand so that it doesn't fall

from the stand. Then fasten the piano and

the stand with four long screws.

CAUTION: Be sure to secure the piano

to the stand with the screws. If you fail

to do so, the unit could fall from the

stand causing damage

or personal

injury.

5. Insert the pedal connection cord that

comes from Pedal Board (C) into the

piano's pedal jack and fasten with clamps

6. Turn the adjuster (installed on the

bottom of C) until it touches the floor to

support the pedal board.

In order to put such another instrument as a sequencer or sound module on the top of the PN70,

you should take the fallboard off the PN70. (See the note on page 16.)

Table of Contents