Kawai PN70 Owner's Manual page 4

ASSEMBLING THE STAND
Be sure that all parts are included before starting to assemble your unit.
PARTS PROVIDED
Side Panel (A). ....... 2 pcs.
Back Panel (B) ....... 1 pc.
Pedal Board (C) ...... 1 pc.
Toe Block (D)........ 2 pcs.
Screw (E, extra long) .. 4 pcs.
Screw (F, long) ....... 8 pcs.
Screw (G, middle)..... 3 pes.
Screw (H, short) ...... 4 pes.
Washer (D ........... 4 pcs.
F
CHW
- сэ
"сэ
i e (I)
0A TU
|!
Bottom view
Ф (L)
Spring Washer (J) ..... 4 pcs.
Round Nut (K) ....... 4 pcs.
Adjuster (L) ......... 1 pe.
(E) (F) (G) (H) (K)
GA
T ©
1. Insert the round nuts (K) into the holes of
Side Panel (А) with keeping the nut's hole
vertical. Insert the screws (E) into the spring
washer and washer. Put (A) to Toe Block (D)
and fasten with four screws (E) from the
bottom.
2. Insert the adjuster (L) on Pedal Board (C).
Fasten (А) and (C) with four screws (F).