Kawai PN70 Owner's Manual page 16

Hide thumbs Also See for PN70:

(2) Connection to an externa! sequencer and sound generator module

When connected as shown in the illustration, you can record songs played on the PN70 with a

sequencer, and use the module's tones (such as piano, harpsichord and other different tones) controlled

by the PN70's MULTI TIMBRE function to create a multi-layer MIDI recording.

MIDI IN

Digital Sequencer (Q-80)

MIDI cable

NOTE:

If using a sequencer or sound module and putting it on the top of the PN70, you should remove the

fallboard.

(1) Open the fallboard and you see the pivot with the spring down the right side of the board.

(2) Slide the lever of the pivot inside and hold it. Then lift the fallboard up and take it off.

- 16 -

Table of Contents