Pioneer CLD-2710K Service Manual page 50

Cd cdv ld player
Hide thumbs Also See for CLD-2710K:
Table of Contents

Advertisement

Disc placement
and tray closed.
* Start play with the TRKG servo open.
* Raise up with tilt neutral.
* The disc type (LD/CD/CDV) is determined when playback starts at the
SLDR position during start play.
* Each time the PLAY button (Be) is pres
close alternately.
* Press and hold down the key.
* With the TRKG servo open, the pickup can be damaged if the SLDR
moves further inward than the lead-in area on the disc. Do not allow the
SLDR to move further inward than the lead-in area.
SLDR REV SCAN
PLAY mode
* Press and hold down the key.
* With the TRKG servo open, the pickup can be damaged if the SLDR
moves further outward than the lead-in area on the disc. Do not allow the
SLDR to move further outward than the lead-in area.
"іп the PLAY mode, press the +10 key. (Тһе player will standby for the
frame No. entry.)
+ Use the numeric Кеуѕ(0—9) to enter the frame No.. Then press the
player's PLAY key to search.
* After the search is completed, the player will return to the operation mode
before the search was performed.
SLDR FWD SCAN
| PLAY mode
Loading Motor
Rotation Clockwise
Counterclockwise
* FWD: Unloading
VR606 and VR605 : For check
ж
(CM AX or
PLAY mode
EON OLI F-0 : Normal state - - - - - - TRKG close ` VR606 (CT BEST)
Checking VR606
TRKG servo open
(toggle)
TRKG open : VR605 (TE MAX)
F-1 : VR606 is activated when opening ће TRKG.
KARAOKE/NORMAL/AUX INPUT
oma
| а CD с
selector switch
22
О c»
О
76

Advertisement

Table of Contents
loading

Table of Contents