Advertisement
1. How to attach the GK-2
@ Place the GK-2 at the appropriate position on
the guitar.
Set up the GK-2 to the guitar at an appropriate
position where
it does not prevent you from
playing the guitar comfortably.
If your guitar has a fine tuning control, set up
the GK-2 to the guitar where it does not prevent
you from using the fine tuning control.
1: Usual type
2: With a Fine Tune
* Set up the GK-2 to the quitar where it does not
prevent you from
operating the S1 and S2
switches comfortably.
* When making connections, do not stretch the
cords of the Normal
Guitar Socket, Divided
Pickup or the connection cable of the GK-2.
* Make sure that the plug of the GK-2's connec-
tion cable and that of the Normal Guitar are well
inside the guitar's body.
if not, they will be
damaged when the guitar is put down with the
pressure and strain given to them.
@ Bore on the holes of the GK-2 to make holes
underneath.
* The diameters
of the under
holes
shculd
be
about 2mm
(0.08 inchas).
* Please make sure that the installation of Divided
Pickup has no problem (e.g. height).
@ Fix the GK-2 with the screw (flat-head tapping
screw) supplied with the GK-2.
* If your guitar is arched-top type (the one with a
round body), the gap between the GK-2 and the
guitar may make it difficult to fix the GK-2. if this
happens, attach the supplied LA spacer at the
rear of the GK-2.
ee
kakak, kah
aa
ah kanaka
N¥dvf
puejoy
kak
dhah
ara
an
The both-sided tape and LA spacer should be at-
tached to the three position indicated with dotted
lines.
Advertisement
