Do you have a question about the GK-1 and is the answer not in the manual?
Questions and answers
Jose Luis martinez
March 21, 2025
My Gk1 pick up is no good can I used GK 2 with same pins of GK 1?
3 comments:
Mr. Anderson
March 21, 2025
Yes, the Roland GK-2 pickup was originally the same as the GK-1 pickup and was later renamed. Both pickups were used in the early 13-pin GK-2 system before Roland developed the GK-2A. This suggests compatibility between the GK-1 and GK-2 pickups in terms of pin configuration.
This answer is automatically generated
Jose Luis martinez
March 21, 2025
@Jose Luis martinez
Jose Luis martinez
March 21, 2025
@Mr. Anderson thank you ..I just need to open GK 2 driver and just sweetch the connection to old GK 1
Need help?
Do you have a question about the GK-1 and is the answer not in the manual?
Questions and answers
My Gk1 pick up is no good can I used GK 2 with same pins of GK 1?
Yes, the Roland GK-2 pickup was originally the same as the GK-1 pickup and was later renamed. Both pickups were used in the early 13-pin GK-2 system before Roland developed the GK-2A. This suggests compatibility between the GK-1 and GK-2 pickups in terms of pin configuration.
This answer is automatically generated
@Jose Luis martinez
@Mr. Anderson thank you ..I just need to open GK 2 driver and just sweetch the connection to old GK 1