Table of Contents
Advertisement
Quick Links
Professional model of air riveter to install blind rivets.
Thank you very much for purchasing "LOBSTER" air riveter. To ensure correct operation, please read
this instruction manual carefully, and keep it in a safe place for later reference.
Professional model of air riveter to install blind rivets.
● Thank you very much for purchasing "LOBSTER" air riveter. To ensure correct operation, please
read this instruction manual carefully, and keep it in a safe place for later reference.
● This is Original instructions. (Original Instruction Manual is written in English Ianguage.)
MANUFACTURER
MANUFACTURER
International Marketing&Sales Division
12-8 Shijo-cho, Higashi-Osaka City
Osaka 579-8053, Japan
Telephone: +81(72)981-7466 Telefacs: +81(72)981-9420
URL https://www.lobtex.co.jp/
AIR RIVETER
ＡＩＲ ＲＩＶＥＴＥＲ
INSTRUCTION MANUAL
INSTRUCTION MANUAL
BUILT-IN ON-DEMAND
BUILT-IN ON-DEMAND
VACUUM SYSTEM
VACUUM SYSTEM
R1A1
R2A1
CONTENTS
CONTENTS
INTRODUCTION ..................... 2
IMPORTANT SAFETY
INSTRUCTIONS.................................1
IMPORTANT SAFETY
NOMENCLATURE .............................3
INSTRUCTIONS
NOMENCLATURE .................. 6
TECHNICAL DATA ...........................4
TECHNICAL DATA .................. 7
PREPARATION BEFORE USE .......5
PREPARATION BEFORE USE ... 8
OPERATING THE AIR RIVETER ... 10
MAINTENANCE .................................8
STORAGE........................................12
MAINTENANCE
STORAGE ........................... 15
PARTS TABLE ................................13
ORDERING PARTS ............... 15
ORDERING PARTS .........................14
EXPLODED VIEW ............... 16
TROUBLESHOOTING .....................15
PARTS LIST ........................ 17
TROUBLESHOOTING ............ 18
............... 3
.................. 11
Ｎｏ .RAR2A1S90130
PRINTED IN JAPAN
1
Advertisement
Table of Contents
Related Manuals for Lobtex LOBSTER R2A1
Summary of Contents for Lobtex LOBSTER R2A1
-
Page 1: Table Of Contents
● This is Original instructions. (Original Instruction Manual is written in English Ianguage.) MANUFACTURER MANUFACTURER International Marketing&Sales Division 12-8 Shijo-cho, Higashi-Osaka City Osaka 579-8053, Japan Telephone: +81(72)981-7466 Telefacs: +81(72)981-9420 URL https://www.lobtex.co.jp/ Ｎｏ .RAR2A1S90130 PRINTED IN JAPAN... -
Page 2: Introduction
● Lobtex Co., Ltd. has the copyright of this manual. It is prohibited to publish, copy or translate to other language without prior consent. -
Page 3: Instructions
IMPORTANT SAFETY INSTRUCTIONS ● IMPORTANT SAFETY INTRUCTIONS ◆ Be sure to read the following Important Safety Instructions carefully and make sure that you ◆ Be sure to read the following Important Safety Instructions carefully and make sure that you understand them thoroughly before using this tool. understand them thoroughly before using this tool. - Page 4 • Repair work should only be carried out by a qualified technician. Please contact your nearest “LOBSTER” distributor, representative, or direct to Lobtex Co., Ltd., Osaka. If the tool is repaired • by someone without the necessary qualifications and experience, the tool may not perform to •...
- Page 5 ⚠ CAUTION 18. The production date of this product is shown brevity code below the tools.(on page5) (Example)year: ２０②⓪ month: ⑩ → B O O ○○○○ ↓ ↓ ↓ ↓ (Lot No. ) How to check manufactured date A year/month of manufacture １...
-
Page 6: Nomenclature
● NOMENCLATURE Tank Joint Tank Case Unit Bleed Plug Nosepiece Frame Head Trigger Frame Head Nut Vacuum Knob Cylinder Cup Warning Label Exhaust Port Bottom View Rotary Jopint Serial No. (Screw size : Parallel pipe thread G1/4) FRAME HEAD INTERNAL PARTS Jaw Pusher Spring Guide Pipe Collar4.0-4.8(with O-ring）... -
Page 7: Technical Data
● TECHNICAL DATA Model No. R2A1 Weight kg 1.28 Operating air pressure MPa 0.5 ～ 0.6 Dimensions (Length×Height×Width) mm 290×267×112 Air consumption per minute L/min （At air pressure 0.6 MPa） 82 (on the occasion of vacuum is working) Tool stroke mm Traction power at 0.6 MPa (on the occasion of vacuum is working) Applicable rivets(rivet diameters) φmm... -
Page 8: Preparation Before Use
● PREPARATION BEFORE USE １ １ Set the Tank Case Unit to the Tank Joint. ⚠ WARNING ● Always attach the tank case unit before use. If you work without attaching the tank case unit, there is a risk that the mandrel of rivet that has beencut is not discharged, and will be clogged inside exhaust pipe, causing a fault of the equipment. - Page 9 ● Shaded areas indicate parts which are installed in the tool as standard accessories. ● Applicable rivet size is marked on the hexagon part of Nosepiece. IMPORTANT Be sure to replace the nose piece and guide pipe unit according to the blind rivet size you are using. Even if the mandrel can be inserted into the nosepiece, if it is the wrong size, it may clog inside.
-
Page 10: Operating The Air Riveter
● OPERATING THE AIR RIVETER １ １ Select a suitable size of rivet for the workpiece to be riveted. １ ２ Replace the nosepiece and Guide Pipe Unit with one which matches the size of the rivet to be used. (Refer to “Preparation Before Use”... -
Page 11: Maintenance
● MAINTENANCE After long periods of use, debris from cut mandrels and other foreign materials tend to build up in various parts of the tool, and the hydraulic oil level also drops, both of which can lead to operating problems.The tool should be cleaned periodically. １... - Page 12 ⚠ CAUTION Tightening method (When only the jaw case is loose, begin your work from step ② .) ① Immobilize the double-face section at the tip of the male screw and tighten the jaw case lock nut with 15 N•m of torque. ②...
- Page 13 ２ Replacement of the Nosepiece * If the Nosepiece is damaged, replace it with a new one. * If you change the rivet size, replace with an applicable Nosepiece. Nosepiece Frame Head １ １ Turn off air supply. (AF 10mm) (AF 21mm) １...
- Page 14 ⚠ CAUTION ● Do not lubricate the air riveter with the frame head nut and frame head removed. Doing so may result in an improper amount of hydraulic oil and cause trouble with the air riveter. Frame Head Nut Frame Head Plunger １...
-
Page 15: Storage
１ ７ Attach the oil stopper screw and seal washer to the air riveter using a hexagonal wrench (width across flats: 4 mm). １ ８ Wipe off hydraulic oil adhering to the main body or spilling out before use. * During disassembly/assembly, be careful to prevent cutting dusts of metal and other objects from getting into the hydraulic oil and Air Cylinder. -
Page 16: Exploded View
● EXPLODED VIEW... -
Page 17: Parts List
● PARTS LIST Index Code Part name Material Frame Head Nut 69500 Aluminum Material 2-B Nosepiece 3.2 10028 Steel ① : Stainless, Aluminum Frame Head 69468 Steel ② : Plastic, Steel, Jaw Case Head 10280 Steel Stainless, Sponge, Paper Ultra Jaws 'M' 10281 Steel Jaw Pusher... -
Page 18: Troubleshooting
● TROUBLE SHOOTING If a problem occurs, check the followings. If the problem persists after checking the items in the table below, contact your nearest “LOBSTER” dealer or direct to us. In making any enquiries about this product or requests for repair work, first check the troubleshooting items below, and then make a note of the model number, the usage conditions and the trouble symptoms in as much detail as possible. - Page 19 WARRANTY & SERVICE ® LOBSTER WARRANTS THAT GOODS COVERED BY THIS MANUAL WILL CONFORM TO APPLICABLE SPECIFICATIONS A N D D R A W I N G S A N D T H AT S U C H G O O D S W I L L B E MANUFACTURED AND INSPECTED ACCORDING TO GENERALLY ACCEPTED PRACTICES OF COMPANIES MANUFACTURING INDUSTRIAL TOOLS.
- Page 20 ＭＥＭＯ...