Kenwood TM-251A Instruction Manual page 91

LOCKING-OUT CODES
The following explains how to inhibit the transceiver from
receiving specific Page codes. Although the codes are
locked-out from the receiver, the transmitter still
transmits a Page on the locked out channels.
1 Press [DTSS] (1 s).
e "PAG" appears.
2 Press [F], [DTSS] to select Code Select.
e The small Page memory "P" and "PAG" start
blinking.
3 Turn the Tuning control, or press microphone
[UP]/[DWN], to display the Page code you want to
lock-out.
4 Press [MR].
e A'"star" icon appears above the number to indicate
the channel has been locked-out.
5 To restore the Display, press any button except [MR]
or [DTSS].
e The lock-out "star" disappears.
Note: You cannot lock-out Page memory 0 or A.
84
AUTO PAGE CANCEL
After successfully paging another station, it is useful to
turn OFF Page to eliminate sending a Page code each
time you transmit. Auto Page Cancel handles this
situation automatically when a station you called
responds using the correct Page code to open your
transceiver's squelch. On your next transmission, your
transceiver then switches OFF your transceiver's Page
function.
1 Press [REV] + POWER ON to enter Menu B.
2 Select Menu No. 51 {page 24}.
e The current Auto Page Cancel status appears.
keer
[MENU]
¢
sane 1 3 6 7 8 OVER '
3 Select a status.
e OFF: Does not affect Page status.
¢ ON: Switches OFF Page after transmission.
e Default: OFF
4 Exit Menu B.