Kenwood TM-251A Instruction Manual page 85

m Setting Message Playback DTSS Code
This procedure allows you to change the default
DTSS code required to use the Message Playback
function.
are
Press [REV] + POWER ON to enter Menu B.
2 Select Menu No. 73 {page 24}.
e The current Message Playback DTSS code
appears.
[)
Select a code using the Tuning control or the
microphone [UP]/[DWN] buttons.
e Alternatively, if your microphone is equipped with
a DTMF keypad, the DTSS code also can be
entered by using the keypad numeric keys.
Press the 3 numeric keys in sequence for the
code you want.
e Default: 919
4 Exit Menu B.
Note: If the Message Playback DTSS code is the same as the DTSS
code for operating, the Message Playback code is given priority.
However, if the same codes are set and the Message Playback
function is switched OFF, the operating DTSS code is given priority.
78