Menu B Access - Kenwood TM-251A Instruction Manual

MENU B ACCESS
Anytime that you want to change a function that is
controlled by Menu B, use the following procedure:
1 Press [REV]+ POWER ON to enter Menu B.
e The menu and menu number selected last appears.
2 Select the desired menu function by pressing either
[MR] or [VFO].
e Press [MR] to increment Menu No., and [VFO] to
decrement Menu No.
e Microphone [MR] or [VFO] may be used if more
convenient.
MENU B CONFIGURATION
Description
3 Select the desired menu selection by turning the
Tuning control or by pressing microphone [UP] or
[DWN].
e When selecting from a group of numeric menu
selections, turning the Tuning control clockwise or
pressing microphone [UP] selects in ascending
order, and turning the Tuning control
counterclockwise or microphone [DWN] selects in
descending order.
4 After selecting the desired menu selection, press
[SHIFT] or [TONE/CTCSS] or [REV] or [DTSS] to
exit Menu B.
Remote Control Mode
Pa
Automatic Page Cancel
54 Transmit Hold for 1750 Hz Tone
@ TM-251E/TM-451E only
DTSS/Page Transmit Delay Time (offset/split only) 350ms/550ms
Transmit Inhibit
Frequency Change during Memory Recall OFF/ON
DATA Connector Baud Rate 1200/9600
24
41