Getting Started - Sony Trinitron KV-27XBR45 Operating Instructions Manual

7 |
|
'
|
Getting Started
Step 1:
Koyearad(eacs
Either an indoor antenna or outdoor antenna should be
used with your TV. However, we recommend that you
connect an outdoor antenna or a cable TV system to get
better picture quality.
To access AUDIO/VIDEO jacks and AC cord on KV-
32XBR85, remove the back panel (see page 9).
How to connect different types of
cables
The illustrations below show the examples of
connecting different types of cables to the TV directly.
A (Rear of TV)
¢ VHF 75-ohm coaxial cable VHF/UHF
oy
or '
« VHF/
UHF
or
¢ Cable 3
B - (Rear of TV)
e VHF only 300-ohm twin lead cable VHF/UHF
or
e UHF only
or
¢ VHF/UHF Antenna connector
(not supplied)
Cc 75-ohm coaxial cable
e VHF ) ) jp a |
(Rear of TV)
VHF/UHF
and
EAC-66 U/V mixer
t (not supplied)
Uke: all
300-ohm twin lead cable
Notes
¢ Most VHF/UHF combination antennas have a signal splitter.
Remove the splitter before attaching the appropriate connector.
¢ Ifa U/V mixer is used, snow and noise may appear in the
picture when viewing cable TV channels over 37.
Connecting an antenna/cable TV
system without a VCR
Cable or antenna (Rear of TV)
ae VHF/UHF
Cable box
If your cable company requires you to connect a cable
box, make the connection as follows:
(Rear of TV)
VHF/UHF
Cable ! o» 218)
Cable box
Cable box and cable
(Rear of TV)
Cable box
-O=D—«<p)
TO
75-ohm coaxial cable
iroreupple CONVERTER
CATV cable -
aS eat 1) &)
VHF/UHF
Pay cable TV systems use scrambled or encoded signals
requiring a cable box* in addition to the normal cable
connection.
* The cable box will be supplied by the cable company.
Note
e You cannot watch the signal through AUX connector as a
window picture.
Cable and antenna
(Rear of TV)
CATV cable
$1 —*)D
AUX
TO
CONVERTER
Antenna cable
ee)
VHF/UHF
Note
¢ Do not connect anything to the TO CONVERTER connector in
this case.
Getting Started 5