Sony Trinitron KV-27XBR45 Operating Instructions Manual page 39

eS a a ee eS
Auto cable input select function
This remote control also features a function that will
switch automatically to your cable box TV input
channel when you turn on the TV or cable box.
You can select 2-6 channels or VIDEO 1 depending on
your cable box. For example, you can set the TV's
channel to 3 whenever you turn the cable box on as
follows:
2 - 6 buttons
ENTER
CABLE BOX/TV
selector
1 Set the CABLE BOX/TV selector to CABLE
BOX.
CABLE BOX. .TV
.
2 While pressing CODE SET, press POWER
(CABLE), TV, 3 and ENTER.
—POWER R ENTER
If you are viewing VIDEO 1 for cable TV, you can set as
follows:
While pressing CODE SET, press POWER
(CABLE), TV/VIDEO and ENTER.
POWER TvANIDEO ENTER
To reset the auto cable input select setting
While pressing CODE SET, press POWER (CABLE)
and ENTER.
POWER ENTER
"ch ° os th
Notes
e Insome cases, your cable box may use a code that is not
provided with this remote control and you may not be able to
operate your cable box with the supplied remote control.
e When you remove the battery from the remote control, the
setting may be erased. Make the setting again each time you
replace the battery, if necessary.
e If your TV's AC cord is plugged in to the cable box's switch
outlet, it may effect the proper operation of this function.
Operations | 39